The tip of an airless sprayer is the real-time deal maker or breaker. If it is performing well, it gives you flawless painting results, but if there are signs of sputtering spray the whole idea of using an airless sprayer gets wasted. 

So, the selection of the right tip matters a lot. It can prevent wastage, gives you spotless results, and also enhances sprayer performance, if the tips work smoothly. However, the scenario can change if you purchase an ineffective or malfunctioning sprayer tip. However, at Sprayer and Parts, you can find the one that perfectly goes with the idea of perfect spraying.

Guide to Choosing the Right Airless Sprayer Tip

If you are looking for a guide or searching for a guide to purchase the right sprayer tip, here is the one for you

Choose Colour  Application

There is a color scheme for application and it decides what suits your airless sprayer the best. For each colour this a different theory, and they include

• Green: Fine finish applications for lower-pressure 
• Blue: For perfect interior and exterior paint tasks
• Gray: For protective coatings up to 500 bar
• Brown: For thin fluid materials and thin plastering
• Yellow: For stripping and marking applications

From the above-mentioned colors, you can choose the type of tip for the desired application.

Consider Fan Width

After choosing the application type, the next step is to consider the fan width of the airless sprayer tip. It defines the performance of the sprayer, the material consumption, and the spraying control. A general survey shows that sprayer tips with small widths are a little slow in terms of performance, but consume less amount of material.

However, the sprayer tips with large widths are faster in performance, but the amount of material they consume is too much. It depends upon how exactly you decide the fan width for your sprayer tip. According to Sprayer and Parts, the best tip is to choose a three-digit code printed process, or choose width in inches and divide by 2. In both cases, you get a perfect fan width for your sprayer tip.

Look for Material Output

The last step of choosing the airless sprayer tip is to find out the material output. If it is larger, or you see that the orifice size goes perfectly with large and thick material output, it means you are on the right track. However, the orifice size is usually defined by sprayer platforms for different materials. 

In this case, you can follow a simple technique, and the technique is to match the size with the last two numbers of the three-digit code: 17. If the last two numbers are higher than the orifice size, it means you have made the right choice. The larger the orifice size means more material output indicating smooth and flawless paint patterns. 

Conclusive Remarks

The process of choosing an airless sprayer tip is a three-step process of careful consideration and measurement. It includes fan width selection, choosing the right color application, and considering material output. At Sprayer and Parts, you get professional help, and proper assistance to make the right tip purchase for your airless sprayer.