Graco 104969 Reducing Bushing
$39.64
$42.90
Save 8%
In Stock
Graco 104969 Reducing Bushing adapts a 1/2" NPT (male) port to 3/4" NPT (female)—ideal for Graco supply setups using a 1/2" ISO inlet hose. Verify your inlet and hose sizes before ordering.
- Part #: 104969
- Size: 1/2" NPT(m) → 3/4" NPT(f)
- Systems: Feed Pump Kits — Husky 515, Husky 716, Husky 1050, Triton 308
- Also used in: HFRS Tandem Supply System for S20 rams
- Tip: Use appropriate thread sealant / PTFE tape
Quantity
Genuine OEM Part
Fast Shipping (Order by 1 PM CST)
Easy Returns
Compatibility & Specifications
Compatible Machines / Systems
This Graco 104969 Bushing, Reducing is documented for the following Graco systems and kits. Always verify port and hose sizes before ordering.
- Graco Feed Pump Kits (with 1/2" ISO inlet hose): Husky 515, Husky 716, Husky 1050, Triton 308
- HFRS Tandem Supply System Kit – for S20 rams
Quick Specs
| Part Number | 104969 |
|---|---|
| Description | Bushing, Reducing (adapter/fitting) |
| Thread / Port Size | 1/2" NPT (male) → 3/4" NPT (female) |
| Typical Use | Adapts a 1/2" ISO inlet hose to a 3/4" NPT hose/fitting in Graco supply systems |
| Construction | OEM Graco component; durable metal bushing (contractor-grade) |
Why Choose This Part
- Genuine Graco fit and sealing for dependable system performance
- Solves size mismatch: 1/2" NPT(m) to 3/4" NPT(f)
- Ideal for feed pump kits and tandem supply systems listed above
- Straightforward install with appropriate thread sealant or PTFE tape
Installation & Safety Notes
- Fully depressurize the system before servicing fittings
- Confirm mating threads and inlet/hose sizes match the adapter
- Use a suitable thread sealant compatible with your material
- Inspect periodically for wear or corrosion; replace if damaged
Frequently Asked Questions
It is a reducing bushing that adapts from 1/2" NPT (male) to 3/4" NPT (female), commonly used when a 1/2" ISO inlet hose must connect to a 3/4" NPT hose/fitting in Graco supply systems.
Documented for Graco Feed Pump Kits (with 1/2" ISO inlet hose) including Husky 515, Husky 716, Husky 1050, Triton 308; and the HFRS Tandem Supply System Kit for S20 rams. Always verify port sizes on your specific unit.
Use a compatible thread sealant or PTFE tape for NPT threads. Tighten with the correct wrench size while avoiding over-torque. Follow Graco safety procedures and depressurize equipment before installation.
This part is primarily referenced in Graco feed pump kits and the HFRS Tandem Supply System Kit. Check your sprayer’s inlet/hose port sizes; if it requires 1/2" NPT(m) → 3/4" NPT(f) adaptation, this bushing may apply.
No reviews yet. Be the first to review this product!
