Graco 107265 Insulated Male Terminal

The Graco 107265 Insulated Male Terminal is a 3/16" male spade connector designed for secure electrical connections in Graco airless sprayers. Ideal for wiring harnesses, switches, and motors.

Part Number: 107265
Type: Insulated Male Terminal
Blade Width: 3/16" (approx. 4.8 mm)
Fits: Ultra, Ultra Max II, Mark Series, and GMAX II Sprayers
Wire Size: ~16 AWG

$8.91

Based on 0 reviews

Description

Overview & Key Details

The Graco 107265 Insulated Male Terminal is a 3/16" male spade/blade electrical connector used throughout Graco airless sprayers for secure, vibration-resistant wiring connections (e.g., motors, switches, and harness leads). It’s commonly specified as a 3/16” male, ~16 AWG insulated terminal.

Compatible Machines (Common Usage)

The 107265 Insulated Male Terminal is used across many Graco airless sprayers. It most often appears in wiring harnesses for the following series (exact usage can vary by model year/serial range and harness revision):

Ultra / Ultra 395, 495, 595 (Classic & Ultra Max variants)
Ultra Max II 650/695, 750/795, 1095, 1595
Mark Series: Mark IV, Mark V, Mark VII, Mark X (ProContractor/IronMan where applicable)
GMAX II Series: 3900, 5900, 7900 (Standard & ProContractor where applicable)
Contractor/ProContractor electric stand & cart sprayers using 3/16" male spade harness terminals

Fit note: Because this is an electrical terminal used within harness assemblies, usage is “universal” within many models that specify a 3/16" male spade. Always confirm against your unit’s parts list or harness diagram for your exact model and serial number.

Quick Specs

Part Number	107265
Type	Insulated Male Terminal (male spade/blade)
Blade Width	3/16" (approx. 4.8 mm) male spade
Typical Wire Size	~16 AWG (per common Graco harness references)
Typical Use	Harness connections to switches, motors, boards, and service pigtails
Insulation	Fully insulated barrel to reduce shorts and vibration-related loosening

Why this part matters

Ensures a snug, low-resistance electrical connection in high-vibration sprayer environments.
Insulation helps prevent accidental shorts and improves durability during service.
Standard 3/16" male spade interface for quick maintenance and reliable mating with female terminals.

Installation & Handling Tips

Disconnect power and relieve all system pressure before accessing wiring.
Crimp to the specified wire gauge (typically ~16 AWG) using a proper ratcheting crimper.
Align the male blade squarely into the female wrap-around blade—seat fully.
Inspect for play; replace any terminals with loosened fit, bent blades, or heat damage.
Follow your exact model’s service manual/parts diagram for lead colors and routing.

Frequently Asked Questions

It is not tied to a single sprayer model. It’s a common 3/16" male spade terminal used in many Graco harnesses. Confirm usage against your sprayer’s parts list by model and serial number.

It’s typically used with ~16 AWG leads in Graco harnesses. Use the correct crimp die for a secure, low-resistance connection.

Yes—this part is a 3/16" male spade. Always pair with the correct female terminal size for a proper fit.

Reuse isn’t recommended if the blade is bent, the insulation is damaged, or the crimp is loose. Replace with a new 107265 to maintain connection integrity.

Check your unit’s parts manual or wiring diagram for a 3/16" insulated male spade call-out (often listed as “TERMINAL, 3/16 in M, 16 AWG”). Match by part number 107265.