Graco 109318 Vee Packing Ptfe

The Graco 109318 V‑Packing; Piston; PTFE is a durable replacement seal designed for precise piston performance in compatible Graco pumps. Key features include:

Material: PTFE (Teflon) for high chemical and temperature resistance
Fits: Displacement Pump 241648, Series A
Ensures proper piston sealing and pump efficiency
Quantity: 2 packings per pump cylinder

$55.43

Based on 0 reviews

Description

Compatible Machines for the 109318 V‑Packing; Piston; PTFE

This page details the genuine Graco part number 109318 (V‑Packing; Piston; PTFE) and the specific pump model(s) it fits. Use this information to ensure correct selection for maintenance and repair.

✅ Machines / Pump Assemblies it Fits

Displacement Pump 241648, Series A (UHMWPE and Carbon‑Filled PTFE Packings) — this manual lists part 109318 as the piston V‑packing for this pump. :contentReference[oaicite:1]{index=1}

???? About the Part

The part 109318 V‑Packing; piston; PTFE is a piston‑packing seal made of PTFE (polytetrafluoroethylene) used in certain Graco displacement pumps. According to the official manual, it is listed under piston packings for model 241648 Series A. :contentReference[oaicite:2]{index=2}

When replacing pump packings, always verify that your pump model and series match the manual’s parts list. Using the wrong packing can lead to improper sealing, reduced pump life and warranty issues.

????️ Key Specifications & Notes

Specification	Details
Material	PTFE (V‑packing, piston) – Carbon‑filled PTFE for water up to 60 °C in the 241648 pump. :contentReference[oaicite:3]{index=3}
Use Location	Piston packing in the fluid‑end of the displacement pump.
Quantity per Pump	2 pieces (per pump cylinder) for model 241648 Series A. :contentReference[oaicite:4]{index=4}
Torque Note	For model 241648 Series A limit packing‑nut torque to 27‑40 N·m (20‑30 ft‑lb). :contentReference[oaicite:5]{index=5}

ℹ️ Additional Compatibility & Important Reminder

While the part 109318 is confirmed for the 241648 Series A pump, verifying your exact pump model and packing type is essential. Some pumps use UHMWPE or other materials rather than PTFE, so the correct part number may differ. :contentReference[oaicite:6]{index=6}

Frequently Asked Questions

A “V‑Packing” refers to a stacked ring style sealing element, often arranged in a V‑shaped profile, which compresses in the housing to form a tight seal around the piston rod within the pump. It helps retain pressure and prevent leakage.

No — you must match your pump’s model, series, and packing material. The part 109318 is specified for the 241648 Series A pump with carbon‑filled PTFE packings. Other pumps may require different packing part numbers (e.g., UHMWPE). Always consult your model’s parts list.

Installing a wrong packing material or part number can lead to poor sealing, increased wear, low pressure, leaks, premature pump failure and possible warranty void. It may also damage adjacent components. Always use genuine Graco parts and follow the correct installation instructions.

Graco 109318 Vee Packing Ptfe

Compatible Machines for the 109318 V‑Packing; Piston; PTFE

✅ Machines / Pump Assemblies it Fits

???? About the Part

????️ Key Specifications & Notes

ℹ️ Additional Compatibility & Important Reminder

Frequently Asked Questions

ADDRESS

INFORMATION

YOUR ACCOUNT

Graco 109318 Vee Packing Ptfe

Compatible Machines for the 109318 V‑Packing; Piston; PTFE

✅ Machines / Pump Assemblies it Fits

???? About the Part

????️ Key Specifications & Notes

ℹ️ Additional Compatibility & Important Reminder

Frequently Asked Questions

What does the term “V‑Packing” mean?

Can I use 109318 in any Graco displacement pump?

What happens if I install the wrong packing type?

ADDRESS

INFORMATION

YOUR ACCOUNT

Compatible Machines for the 109318 V‑Packing; Piston; PTFE