Graco 109506 Elbow Fitting

Graco 109506 Elbow Fitting – OEM 90° Elbow Connector

The Graco 109506 is a genuine OEM elbow fitting (90°) designed to provide a sealed, robust fluid‑line bend in Graco industrial systems and spray equipment. It belongs to the “Repuestos Generales / Spare Parts” category. :contentReference[oaicite:1]{index=1}

Compatible Machines

• Graco industrial spray systems that list part number 109506 under the “Racor Elbow / Fitting Elbow” spare parts category. :contentReference[oaicite:2]{index=2}
• General Graco fluid‑handling or finishing equipment where 90° elbow fittings are used in hose or pipe routing (confirm via your machine’s parts breakdown).

Key Features & Benefits

Installation Tips

• Confirm machine model and serial number, then check your parts manual to verify part 109506 is listed for your machine.
• Ensure the fluid lines and fittings are depressurized before removing old fittings.
• Clean mating surfaces and threads thoroughly; ensure no debris or old sealant remains before installing the elbow fitting.
• Apply proper thread‑sealant or tape if required by your machine’s manual and torque the fitting per manufacturer guidance.
• After installation, run a system check for leaks and confirm that flow and pressure are correct.

Frequently Asked Questions