Graco 110009 Compound Thermal Lubricant

Advanced Compound Thermal Lubricant for High-Pressure Coating Systems and Pump Efficiency Optimization

Graco 110009 Compound Thermal Lubricant is engineered for high-demand pumping systems and airless sprayer manifolds that require sustained thermal stability and friction control. This advanced compound integrates seamlessly with modern coating equipment supporting professional coatings in high-viscosity, high-pressure filtration processes. Its proprietary thickener network and specialized additive package ensure optimal dispersion of solids, precise film formation, and enhanced pump efficiency under variable ripple loads. By using Graco’s precision-engineered lubricant, maintenance cycles extend significantly, mitigating galling and bore wear in reciprocating and diaphragm pump assemblies. Field engineers benefit from consistent performance across a wide ambient temperature spectrum, enabling precise metering and control when handling high-solid and high-build materials. Packaged in compact 2.7 × 9.35 inch cartridges delivering 0.015 ft³ of compound, the unit allows quick reload without contamination and elevates clearance stability in tight-tolerance systems. For technicians seeking reliable component longevity in complex distribution networks, this grade eliminates breakthrough leaks and maintains surface integrity even during extended runtimes in demanding environments such as multi-stage paint supply and spray automation stations employing paint sprayer heads.

• NLGI Grade: 2.5 for consistent viscosity retention between –30 °C to 200 °C.
• Thermal Conductivity: 1.1 W/m·K ensuring rapid heat dissipation in pump chambers.
• Dynamic Viscosity: 45 000 cP at 25 °C under 10 s⁻¹ shear for stable film under extreme pressure.

Detailed rheological profiling confirms that Graco 110009 exhibits exceptional shear stability and structural recovery after prolonged workload cycles. The polyurea-lithium complex thickener matrix resists breakdown under micro-cavitation and delivers robust load-carrying capacity up to 4 000 psi. Anti-oxidation and anti-corrosion inhibitors protect ferrous and non-ferrous surfaces, significantly boosting seal longevity in packed gland assemblies and O-ring interfaces. Precision testing with varied orifice sizes and flow rates validates compatibility with Graco’s full range of graco spray tips, ensuring uniform atomization and reduced overspray across all tip configurations. In industrial settings, the compound’s low volatility minimizes oil migration, safeguarding downstream filters and preserving high-pressure filtration integrity within three-stage separation units.

Design and Material Composition

The formulation of Graco 110009 centers on a dual-base oil system combining a synthetic ester backbone with a mineral oil fraction to balance lubricity and oxidative resilience. Unique polymeric additives create a three-dimensional thickener scaffold that binds lubricant to sliding metal interfaces, offering high-load protection and exceptional wear resistance over extended durations. Specialized EP agents activate under elevated surface pressures to form protective tribofilms, reducing coefficient of friction by up to 35 %. Corrosion inhibitors and moisture scavengers maintain performance in humid or water-contaminated environments, making it suitable for coating lines and bulk storage modules, including drum cage configurations in warehouse installations such as those in drum cage texas. The compound’s micro-fine particle dispersion prevents sedimentation, enabling seamless integration with grease pumps, central lubrication systems, and automated dispensing valves without altering calibration settings.

Usage insights stress the importance of routine inspection and replenishment intervals aligned with ISO 6743-9 lubrication schedules. For optimal performance, technicians should purge old residues, verify filter cleanliness, and apply fresh compound to bearing races, gear sets, and actuator stems every 500 operational hours or following high-temperature excursions above 180 °C. When combined with proper filtration maintenance, Graco 110009 significantly reduces wear debris generation and extends service life of critical components by up to 60 %. Its compliance with industry environmental guidelines allows safe disposal of spent material under standard waste protocols, while its stable formulation prevents drift in viscosity that can compromise pump tuning. Whether deployed in automotive coating plants, OEM assembly lines, or heavy machinery hubs, this lubricant empowers maintenance teams to achieve peak throughput, maximize equipment uptime, and uphold stringent quality standards in modern spray finishing operations.