Graco 224453 5-Pack Fluid Filter kit 100 Mesh
$34.85
$66.50
Save 48%
Available to Order
Graco 224453 Fluid Filter Kit (100 Mesh, 5-Pack) provides clean, consistent flow for air-assisted guns. Ideal for thin coatings like stains, lacquers, and enamels — helps protect tips and ensure a fine finish.
- Fits Graco G15 and G40 Spray Guns
- Includes 5 replacement filters (100-mesh / 0.005" gap)
- Designed for smooth spray patterns and reduced tip clogging
- Perfect for maintenance and quick replacements on-site
Quantity
Genuine OEM Part
Fast Shipping (Order by 1 PM CST)
Easy Returns
Fine Filtration for Graco G-Series Guns (100-Mesh, 5-Pack)
Compatible Machines
This 100-mesh filter pack is designed for Graco finishing guns listed below. Always confirm with your gun’s parts manual before ordering.
- Graco G15 Air-Assisted Spray Gun
- Graco G40 Air-Assisted Spray Gun
Product Snapshot
| Part Number | Graco 224453 |
|---|---|
| Description | 5-Pack Fluid Filter Kit, 100 Mesh (fine filtration for smooth, consistent spray) |
| Mesh / Gap | 100-mesh (approx. 0.005" gap) |
| Typical Materials | Stains, lacquers, enamels, and other thin-to-medium viscosity coatings |
| Primary Use | Filters fine debris to protect tips and maintain finish quality in G15/G40 guns |
| Pack Qty. | 5 Filters |
Usage & Care Tips
- Match mesh to material: 100-mesh is ideal for thin coatings; heavier coatings may require a coarser mesh.
- Install correctly in the gun’s filter housing and check orientation/seal.
- Rinse or replace filters regularly—clogged filters restrict flow and raise pressure.
- When switching materials, review the recommended mesh for the new coating.
Frequently Asked Questions
No. It’s specified for G15 and G40 air-assisted guns. Always verify compatibility in your gun’s parts manual before purchase or installation.
Use 100-mesh for thinner materials like stains, lacquers, and enamels. For heavier coatings, consider a coarser mesh to prevent flow restriction and pressure spikes.
Replace when visibly damaged, after prolonged use with heavily-pigmented materials, or if you notice rising pressure/flow restriction despite cleaning. Many pros keep spares and change pre-emptively per job.
A clean 100-mesh filter supports a smoother pattern by removing fines. If the filter clogs, you may see pressure rise and pattern issues—clean or replace promptly.
Mesh ratings are not interchangeable by default. Use the mesh recommended for your material and gun setup. If you need a different mesh, select the correct Graco filter part for your gun.
No reviews yet. Be the first to review this product!
