Graco 111713 Retaining Ring – Product Overview
The Graco 111713 Retaining Ring is an OEM replacement part designed to secure internal components (such as pistons, spacers or seals) in high‑pressure fluid systems, preventing axial movement in the assembly. A listing shows dimensions approx. “.1337 +X+.1337 +X+.1337+ in” and weight “0.001+ lbs”. :contentReference[oaicite:1]{index=1}
Key Features
- OEM quality — genuine Graco replacement part. :contentReference[oaicite:2]{index=2}
- Functions as a Retaining Ring — holds internal parts in place under load and pressure.
- Compact, precision‑machined part for tight tolerance fluid section assemblies.
Compatible Machines
Here are some common Graco machine series where this retaining ring may be used. Always confirm with your machine’s exact model number and parts diagram before installation.
- Graco Ultra 395 PC – Stand / Hi‑Boy configurations
- Graco Ultra Max II 490 PC / 495 PC / 595 PC – ProCart / Stand variants
- Graco Ultra Max II series (e.g., 695, 795) – contractor‑grade airless sprayers
*These series are suggested based on shared fluid‑section or manifold components, and may not guarantee fit for your specific serial number.*
Installation & Maintenance Tips
When replacing the retaining ring, follow these guidelines to ensure reliable performance:
- Ensure system is depressurized and safe to service before disassembly.
- Inspect groove and surrounding components—if wear or damage present, replace adjacent seals/spacers too.
- Clean installation area thoroughly of debris, old sealant or residue.
- Insert the retaining ring properly into its groove, ensuring full seating and correct orientation.
- Re‑assemble and torque per manufacturer instructions; then test system at normal operating pressure for any leaks or movement.
Frequently Asked Questions
The retaining ring secures internal components by preventing axial displacement and maintaining alignment of moving parts within high‑pressure fluid systems.
Check your machine’s model number and serial number, then review the parts diagram/exploded view for your variant and look for part number 111713. If listed, it fits; if not, contact a Graco authorised parts distributor.
Substituting without verifying dimensions, material, groove fit or part number is not recommended. Using an incorrect ring may lead to improper seating, component wear or failure. Always match the exact part number in your diagram.
Note: Always wear suitable protective equipment when servicing high‑pressure fluid systems and follow all safety instructions as provided by Graco and your equipment manufacturer.
