Graco 111714 Pan‑Head Machine Screw – Product Overview
The Graco 111714 Pan‑Head Machine Screw is a genuine OEM fastener used by Graco for securing internal assemblies in their coating, pump and sprayer systems. It is listed in parts documentation for certain models as “SCREW, mach, pan head”. :contentReference[oaicite:1]{index=1}
Key Features
- Genuine OEM part — ensures proper fit and specification.
- Pan‑head machine screw design — provides a flat bearing surface with low profile head for secure mounting.
- Used in critical fastening zones of high‑pressure pump and sprayer assemblies — supporting reliability under demanding conditions.
Compatible Machines
Here are some Graco machine series where part number 111714 is referenced in their parts list. Always check your specific model number and serial range to confirm fitment.
- Graco RoadPak 25 (M701 – M705) series – referenced in parts list documentation. :contentReference[oaicite:2]{index=2}
- Graco equipment listed in manual 3A 5386 (road‐machine/powerpak frame series) – part 111714 appears as “SCREW, mach, pan head”. :contentReference[oaicite:3]{index=3}
*This list is indicative only—confirm against your machine’s exact parts breakdown.*
Installation & Maintenance Tips
When installing part 111714, follow these best‑practice guidelines:
- Ensure the system is powered down and fully depressurized before servicing.
- Inspect mating surfaces and threads for damage, corrosion or contamination.
- Use the correct screwdriver/driver bit to avoid rounding the pan‑head slot or cross‑drive.
- Torque to the manufacturer’s specification where provided — over or under‑tightening may compromise assembly integrity.
- During re‑assembly, clean the surrounding area of debris and ensure the screw seats fully flush to prevent vibration or loosening.
Frequently Asked Questions
A pan‑head machine screw features a slightly domed head with a flat bearing surface underneath, which provides good clamping area and a low profile above the surface. It’s used in machine assemblies where appearance and flush mounting are important.
You should locate your machine’s model number, and then consult the parts diagram or exploded view for that model. If the part number 111714 appears in the diagram for the location you are servicing (listed as “SCREW, mach, pan head”), then it fits. Otherwise, use the number listed on your machine.
It is not recommended to substitute a screw without verifying all specifications (head style, thread size, material, strength). Using an incorrect screw may result in improper clamping, vibration loosening or mechanical failure. Always match the exact part number when available.
Note: Ensure you follow all safety instructions, use correct tooling and protective equipment when servicing high‑pressure or industrial coating equipment.
