Graco 111721 Cable – Product Overview
The Graco 111721 Cable is an OEM replacement control cable designed for remote trigger operation and line‑striping setups. It is listed for use in airless spraying and line striping equipment. :contentReference[oaicite:1]{index=1}
Key Features
- Genuine OEM part — ensures correct fit and performance.
- Designed for remote or gun‑trigger actuation in line‑striping and airless systems.
- Durable construction referenced (weight ~0.405 lbs) in listing. :contentReference[oaicite:2]{index=2}
Compatible Machines
Below are known machine series or models where part number 111721 is referenced. Always verify your machine’s model and serial number for exact fitment.
- Graco LineLazer 3000 – referenced explicitly for this cable. :contentReference[oaicite:3]{index=3}
- Graco line‑striping / airless sprayer systems configured for remote gun trigger cables (various models) based on listings. :contentReference[oaicite:4]{index=4}
*List is indicative only. Please confirm with your official parts diagram for your exact machine variant.*
Installation & Maintenance Tips
When installing or replacing the cable, follow these guidelines to ensure reliable operation:
- Ensure the machine is powered off and safely depressed/resprayed before servicing.
- Check the cable ends and connectors for wear or corrosion — replace if damaged.
- Route the cable avoiding tight bends or sharp edges to prevent premature failure.
- Secure mounting points and ensure the trigger or remote end actuates smoothly.
- After installation, test the trigger remotely under low pressure to verify correct operation before full use.
Frequently Asked Questions
This cable is used to connect the remote trigger or gun handle to the machine’s control assembly in line‑striping or airless spray systems, enabling actuation of the spray gun from a distance.
Check your machine’s model number and serial number. Then look up the parts diagram or exploded view for your specific variant and see if part number 111721 is listed in the gun‑cable or remote‑trigger section. If it appears, it fits; if not, use the number shown for your machine.
Substituting a different part number is not recommended unless all specifications (connector type, length, mounting ends, function) match exactly. Incorrect cables may lead to improper trigger response, loss of remote control or unsafe operation.
Note: Always use appropriate safety gear and follow the machine manufacturer’s instructions when working on remote trigger cables or high‑pressure spray equipment.
