Overview & Key Benefits
Compatible Machines
The Graco 24W315 e-Xtreme Z25 Electric High Pressure Airless Sprayer is a complete sprayer unit. It is not a part that installs into other sprayers. Use it as a standalone rig with correctly rated accessories:
- Works with Graco high-pressure airless spray guns rated at ≥ 2600 psi (or higher)
- Compatible with high-pressure airless hoses rated at ≥ 2600 psi with matching 3/8" NPT outlet connection
- Supports standard airless tips/guards appropriate for protective coatings (within system pressure/flow limits)
- Pairs well with other rigs in the e-Xtreme family (e.g., Z-series variants) when standardizing accessories across a fleet
The e-Xtreme Z25 delivers high-pressure performance for protective coatings without an air compressor. Its electric drive minimizes icing, reduces noise, and simplifies setup—ideal for shops and jobsites seeking a clean, efficient alternative to pneumatic rigs.
Key Specifications
| Model / Part # |
24W315 (e-Xtreme Z25 Electric High Pressure Airless Sprayer) |
| Sprayer Type |
Electric-driven, high-pressure airless sprayer (no compressor required) |
| Max Working Pressure |
2600 psi (≈ 18 MPa / 180 bar) |
| Fluid Connections |
Inlet: 1-1/4" NPT (male) | Outlet: 3/8" NPT (male) |
| Fluid Temp Limit* |
Up to approx. 160 °F (~71 °C) with compatible hose/gun |
| Included |
Sprayer unit, hose & gun (factory-matched for pressure/temperature class) |
| Typical Use |
Protective coatings, industrial maintenance, high-build materials (per tip/pressure limits) |
*Always verify the pressure/temperature ratings of every accessory installed on the system.
Why Choose the e-Xtreme Z25
- Plug-and-spray convenience—no compressor, fewer freeze-up/icing issues vs pneumatic
- Consistent atomization with strong pressure stability for a quality finish
- Lower noise and simpler jobsite logistics than air-motor systems
- Accessory flexibility—use properly rated guns, hoses, tips, and filters
Recommended Applications
- Protective & industrial coatings on steel, tanks, structural members
- Maintenance painting in plants, shops, shipyards (where electric power is available)
- High-build materials within rated pressure/flow limits (consult product/TDS for tip sizes)
What’s Included
- Graco 24W315 e-Xtreme Z25 sprayer assembly
- High-pressure airless hose (factory-matched rating)
- Airless spray gun (factory-matched rating)
- Basic setup & operation documentation
Fit & Compatibility Notes
- This is a complete sprayer—not a replaceable pump for other Graco sprayers.
- When changing hoses/guns, always select components with equal or higher pressure/temperature ratings than the sprayer’s specification.
- Use appropriate filters, tip sizes, and extensions per coating manufacturer guidance.
Frequently Asked Questions
No. It is an electric high-pressure airless sprayer, so no air motor or compressor is required.
Use airless hoses and guns rated ≥ 2600 psi (or higher) and ensure the outlet connection matches the sprayer (3/8" NPT). Always verify ratings across the entire fluid path (gun, hose, swivels, filters, tips).
Many accessories (tips, filters, suitably rated hoses/guns) are shared across the e-Xtreme family. Internal service parts may vary by specific model; consult the model-specific manual/exploded view when ordering parts.
The Z25 is suited for many protective/industrial coatings. Choose tip sizes and filters per coating manufacturer TDS, and ensure material viscosity and required atomization are within the system’s pressure/flow capability.
The factory-included hose & gun are matched to the system’s pressure/temperature class and cover many common applications. For specialized jobs (longer hose runs, specific tips, extensions), select accessories rated for ≥ 2600 psi.
