Graco 24Y317 e-Xtreme Z25 Electric High Pressure Airless Sprayer

The Graco 24Y317 e-Xtreme Z25 is a high-pressure electric airless sprayer built for industrial and protective-coating jobs. It delivers smooth performance without the need for an air compressor.

Electric Drive – no air motor or icing issues
Max Pressure: 2600 psi (18 MPa)
Fluid Outlet: 3/8" NPT (male)
Compatible Guns: Graco XTR-5 / XTR-7
Applications: Protective coatings, steel structures, in-plant use

$12505.64

Based on 0 reviews

Description

Overview & Key Details

Compatible Machines / Systems

The Graco 24Y317 e-Xtreme Z25 is a complete electric high-pressure airless sprayer. It “fits” into professional coating setups that use high-pressure airless guns, hoses and accessories rated to the unit’s working pressure and thread sizes.

High-pressure airless spray guns such as Graco XTR-5 / XTR-7 (use tips/guards rated for high pressure).
Standard airless tip families (e.g., RAC X) when used with the matching high-pressure guard and gun.
High-pressure airless hoses rated at or above the unit’s working pressure (typical 3/8" ID) with 3/8" NPT outlet connection.
Fixed in-plant lines, spray booths, and automated systems that accept a 3/8" NPT fluid outlet and an adequate fluid supply to the 1-1/4" NPT inlet.
Industrial/protective-coatings applications where an electric (no air motor) sprayer is preferred over pneumatic units.

Product Description

The e-Xtreme Z25 series brings electric power to high-pressure coating work—reducing pulsation, eliminating air-motor icing, and lowering operating noise. Model 24Y317 is the “Hopper Ready, includes hose & gun” configuration, designed for protective coatings and industrial use.

Key Specifications

Model / Part Number	Graco 24Y317 e-Xtreme Z25 (Electric High Pressure Airless Sprayer)
Max Fluid Working Pressure	2600 psi (18 MPa, 180 bar)
Max Fluid Temperature	160°F (71°C)
Fluid Outlet	3/8" NPT (male)
Fluid Inlet	1-1/4" NPT (male) (supply / hopper connection)
Power	Electric drive (no compressor required); Plug-and-spray design (commonly used on 230–240 V job sites)
Typical Hoses	High-pressure airless hoses (often 3/8" ID) rated ≥ 2600 psi, with 3/8" NPT female ends
Recommended Gun Families	Graco XTR-5 / XTR-7 high-pressure guns (use appropriate guard & tips)
Applications	Protective coatings, structural steel, plants & fabrication, in-plant finishing, maintenance

Why Choose the e-Xtreme Z25

Electric Drive — no compressor needed; quieter operation and no icing.
Smoother Pattern — reduced pulsation for consistent coating quality.
Industrial-Grade Build — engineered for demanding protective-coatings jobs.
Hopper-Ready configuration with hose & gun included for fast setup.

What’s Included*

24Y317 typically ships as a hopper-ready kit with hose & gun. Always check your box contents and local listing for exact inclusions.

Frequently Asked Questions

High-pressure airless guns such as Graco XTR-5 and XTR-7 are commonly paired with the Z-series sprayers. Use the correct guard and high-pressure rated tips for your coating and pressure.

The fluid outlet is 3/8" NPT (male). Use airless hoses rated at or above 2600 psi (18 MPa, 180 bar); 3/8" ID is typical for this flow/pressure class. The fluid inlet is 1-1/4" NPT (male) for supply/hopper connection.

No. The e-Xtreme Z25 is an electric sprayer (no air motor), so there is no compressor icing, less noise, and simpler setup compared to pneumatic pumps.

The e-Xtreme platform is designed for common industrial power (often 230–240 V single-phase). Always confirm local electrical specs and a qualified electrician’s setup for your site.

Use high-pressure rated airless tips appropriate for your coating and the gun/guard you’re using (e.g., RAC X with the matching guard). Select orifice/fan size per coating datasheet and production needs.