Graco 238444 Q Strainer 30 Mesh
$14.94
$34.60
Save 57%
In Stock
The Graco 238444 Q Strainer 30 Mesh is a short, Q-style outlet screen designed to protect your sprayer pump and gun from debris. Ideal for heavy coatings and high-solids materials.
- Used with Xtreme 85 cc and 115 cc Lower Units
- Coarse 30 mesh screen for heavy latex and block fillers
- Prevents clogs and ensures consistent spray performance
- Durable design for long service life and easy cleaning
Quantity
Genuine OEM Part
Fast Shipping (Order by 1 PM CST)
Easy Returns
Overview & Key Details
The Graco 238444 Q Strainer 30 Mesh is a short, Q-style outlet screen designed to trap larger particles before they reach your pump and gun. Ideal for heavy coatings where a coarser filter is required.
Compatible Machines
This strainer is used with the following Graco systems:
- Graco Xtreme 85 cc Lower Units (Q-style short outlet screen)
- Graco Xtreme 115 cc Lower Units (Q-style short outlet screen)
- Graco / ASM / AirlessCo rigs that specify a Q-style short 30-mesh outlet filter
Key Specifications
| Part Number | 238444 |
|---|---|
| Filter Type | Q-style short outlet strainer |
| Mesh Rating | 30 mesh (coarse; suited for heavier materials) |
| Typical Use | Heavy latex, elastomerics, block fillers, and other high-solids coatings |
| Pack Options | Commonly supplied in multi-packs (e.g., 25-pack). Check listing for quantity. |
| Compatibility Note | Used with Xtreme 85 cc and 115 cc lowers and other rigs that call for this specific screen style. |
Product Description
Keep debris out of your fluid section and reduce tip clogs with the Graco 238444 Q Strainer 30 Mesh. This Q-style short screen sits at the outlet/manifold and provides reliable coarse filtration without starving flow on high-build materials.
- ✔ Coarse 30-mesh balance — captures larger particles while maintaining output.
- ✔ Protects pump & gun — helps extend component life and reduce downtime.
- ✔ Quick service — simple drop-in replacement; clean or swap as needed.
- ✔ Consistent finish — fewer clogs and spits on heavy coatings.
Use & Maintenance Tips
- • Confirm your sprayer uses a Q-style short screen (not long) before ordering.
- • Choose 30-mesh for heavier materials; use finer meshes only when specified.
- • Inspect screens daily when spraying high-solids coatings; replace if damaged or deformed.
- • Rinse and back-flush with appropriate solvent; avoid wire-brushing the mesh.
| Frequently Asked Questions |
|---|
Yes. The Graco 238444 Q Strainer 30 Mesh is a short outlet/manifold screen (Q-style) that sits at the fluid outlet to catch debris before it reaches the hose and gun.
30-mesh is a coarse screen commonly used for heavy latex, elastomerics, block fillers, and high-build coatings. Always follow your coating data sheet and sprayer manual for the recommended mesh.
Inspect and clean daily during heavy use. Replace when the mesh is torn, flattened, or if repeated clogs occur even after proper cleaning. Many contractors keep a multi-pack on hand for quick swaps.
No. This is a Q-style short screen. Some sprayers use long outlet screens; those require a different part. Check your model’s parts breakdown to confirm the screen length and style.
Outlet strainers and tip/handle filters work together. Use the mesh combination recommended by Graco and your coating manufacturer. For heavy materials, a coarse outlet screen like 30-mesh helps maintain flow while a suitable tip filter refines final filtration.
No reviews yet. Be the first to review this product!
