Graco 112782 90 Deg Swivel Elbow Fitting

Overview of the Part

The 112782 FITTING, ELBOW, SWIVEL, 90 DEG from Graco is a precision‑engineered right‑angle swivel elbow fitting designed for use in high‑performance fluid handling systems. It allows a 90° turn in the fluid line while the swivel function helps reduce hose stress and improves routing flexibility.

Key Features & Specifications

Compatible Machines

This part is listed in the parts manual for the following Graco systems and feed‑modules:

• Graco XM PFP series – Feed Module for models 262947, 262938, 262939. :contentReference[oaicite:1]{index=1}
• Graco XM PFP base & hazard‑location variants (e.g., 262941, 262943) – as part of the same system family. :contentReference[oaicite:2]{index=2}

Why Install This Part?

By installing the 112782 elbow/swivel on your system you gain:

• A tighter routing path where space is restricted, thanks to the 90° turn feature.
• Reduced hose stress and kinking, because the swivel function allows movement of the connection point independently of the hose.
• Genuine OEM compatibility, helping maintain system reliability and avoiding costly downtime or mismatched parts.

Installation Tips & Best Practices

When fitting this elbow:

• Verify the thread types and sizes in your machine’s parts manual — even though listed, variants may exist for different models.
• Ensure full system pressure rating matches or exceeds the machine’s operating conditions — plural‑component systems may run at very high pressures (e.g., up to ~6,000 psi for XM PFP). :contentReference[oaicite:3]{index=3}
• Use proper torque and sealing methods appropriate for your application (thread sealant or tape only if recommended by your machine manual).
• After installing, check the swivel function under no‑pressure and under pressure to ensure there is no binding or unwanted movement.

Frequently Asked Questions