Graco 288930 AirPro Air Spray Pressure Feed Gun

Graco 288930 AirPro Air Spray Pressure Feed Gun is a professional conventional air spray gun designed for use with external pressure pot systems, delivering consistent atomization for industrial and automotive coatings.

Pressure-feed design for continuous material flow
0.042″ (1.1 mm) nozzle for fine, controlled spray pattern
Requires external pressure pot and air compressor
3/8″ fluid inlet and 1/4″ air inlet connections
Suitable for enamels, epoxies, urethanes, and water-based coatings

$419.99

Based on 0 reviews

Description

Compatible Machines

Graco Pressure Pot Paint Feeding Systems
Graco 2-Quart Pressure Feed Pots
Graco 5-Gallon Pressure Feed Tanks
Pressure Pot Systems with Standard 3/8″ Fluid and 1/4″ Air Connections
Industrial Booth Spray Systems with External Compressor Feed

Product Description

The Graco 288930 AirPro Air Spray Pressure Feed Gun is a professional-grade, manual pressure-feed spray gun designed for controlled coating application in industrial and workshop settings. This conventional air spray gun delivers fine atomization when paired with a suitable pressure pot system and a regulated compressed air source. It excels with coatings including enamels, epoxies, urethanes, and waterborne materials.

Key Specifications

Specification	Detail
Spray Type	Conventional Air Spray
Feed System	Pressure Feed (Requires External Pot or Tank)
Nozzle Size	0.042″ (1.1 mm)
Air Inlet	1/4″ NPSM
Fluid Inlet	3/8″ NPSM
Air Pressure Range	Up to ~100 psi
Fluid Pressure Max	Up to ~300 psi
Use Case	Industrial & Metal Coatings

How It Works

The gun attaches to a pressure pot or pressure tank via fluid and air hoses. Compressed air supplied by an external compressor regulates atomization through the air cap while the pressure pot delivers a consistent flow of coating to the gun. Adjusting fluid and air pressures fine-tunes spray pattern and finish quality.

Application & Use

Industrial panel and metal part finishing
Automotive refinish and body shop coatings
Woodwork and furniture surface coatings
Sealants and specialty coating application

Frequently Asked Questions

The spray gun typically includes the gun body, air cap, fluid nozzle and needle. Hoses, pressure pots, and compressors are sold separately.

Yes, as long as the compressor delivers clean, dry air in the required pressure range and connects with 1/4″ fittings. Pressure regulators and moisture traps improve performance.

No. A separate pressure pot or feed tank must be used. The gun connects to the pot via 3/8″ fluid hose.