Graco 289005 AirPro Air Spray Gravity Feed Gun

The Graco 289005 AirPro Air Spray Gravity Feed Gun is a professional HVLP spray gun designed for precise, smooth, and efficient coating application with reduced overspray.

HVLP air spray technology for high transfer efficiency
0.055" (1.4 mm) nozzle for fine and medium-viscosity coatings
Gravity feed design for consistent material flow
Compatible with regulated air compressor spray systems
Suitable for automotive, industrial, and fine finish applications

$685.44

Based on 0 reviews

Description

Graco 289005 AirPro Air Spray Gravity Feed Gun Overview

The Graco 289005 AirPro Air Spray Gravity Feed Gun is a professional-grade spray gun designed with an HVLP (High Volume Low Pressure) system and a 0.055 inch (1.4 mm) nozzle for uniform atomization and superior control. It offers smooth coverage, improved material transfer efficiency, and ergonomic comfort for extended spraying sessions. It connects to standard air compressor systems and is suitable for a range of coatings including waterborne, urethane, enamels, epoxies, and others.

Compatible Machines

Graco HVLP spray systems that support gravity feed guns
Industrial coating setups with regulated air compressors
Fine finish gun platforms designed for precision spraying tasks
Spray booths or stations using standard air spray gun configurations
Any pressure-regulated setup with 1/4″ NPSM air supply and 3/8″ NPSM fluid connection

Key Features

Part Number	289005
Spray Type	Air Spray (HVLP)
Nozzle Size	0.055 inch (1.4 mm)
Feed Method	Gravity Feed
Air Inlet	1/4″ NPSM
Fluid Inlet	3/8″ NPSM
Max Air Pressure	100 psi
Application Range	Automotive finishing, woodworking, cabinetry, furniture coating, industrial tasks

Benefits

Consistent and smooth atomization for high-quality finishes
Improved coverage with reduced overspray and material waste
Ergonomic design reduces operator fatigue
Wide material compatibility including urethanes, enamels, waterborne coatings, epoxies and more
Easy connection to standard air compressors and spray booths

Frequently Asked Questions

The gun runs on HVLP air spray and typically uses up to 100 psi at the connection, though effective atomization is achieved at lower regulated pressures through an air compressor or regulator setup.

Yes. The 289005 supports a wide range of coatings including waterborne, urethane, enamel, epoxies, latex and solventborne materials when used with proper setup and regulation.

The standard configuration is without a gravity cup; fluid supply is connected via the 3/8″ NPSM fluid inlet.