Graco 289245 Finex Air Spray Gravity Feed Gun
$232.00
In Stock
Graco 289245 Finex Air Spray Gravity Feed Gun - a lightweight, conventional gun built for clean, repeatable fine-finish work. Ideal for cabinetry, furniture, auto refinish parts, and general finishing.
- Spray type: Conventional, gravity-feed (non-HVLP)
- Nozzle/needle: 1.5 mm general-purpose setup
- Air inlet: 1/4" NPSM
- Max air pressure: 100 psi
- Materials: Waterborne & solventborne, lacquers, urethanes, epoxies (with proper reduction)
- Comfort: Light body with smooth trigger pull
Quantity
Genuine OEM Part
Fast Shipping (Order by 1 PM CST)
Easy Returns
Precision Gravity-Feed Finish Gun for Fine-Control Applications
Graco 289245 Finex Air Spray Gravity Feed Gun is a lightweight, conventional (non-HVLP) gun designed for clean atomization and repeatable finish quality on wood, metal, plastics, and automotive components.
Compatible Machines & Systems
This is a stand-alone air spray gun (not an airless or pump-mounted part). It works with standard compressed-air setups that meet the requirements below.
- Shop air system capable of clean, regulated air supply up to 100 psi.
- 1/4" NPSM air inlet on the gun - connect with a matching hose/coupler.
- Gravity cup feed (included/required) for material supply.
Key info:
- 1.5 mm needle/nozzle setup
- Conventional gravity-feed, non-bleeder
- Max air pressure: 100 psi
- Air inlet: 1/4" NPSM
Why choose the Finex 289245
- Consistent fine finish for lacquers, urethanes, waterborne, and epoxies with proper reduction.
- Lightweight body with smooth trigger pull to reduce operator fatigue.
- Flat, controllable pattern for edges and broad passes.
- Simple maintenance with readily available wear parts.
Technical Specifications
| Model | Graco 289245 Finex Air Spray Gravity Feed Gun |
|---|---|
| Spray Technology | Conventional (non-HVLP) gravity-feed, non-bleeder |
| Nozzle / Needle | 1.5 mm setup (general-purpose fine finish) |
| Air Inlet | 1/4" NPSM |
| Max Air Pressure | 100 psi |
| Typical Materials | Waterborne & solventborne coatings, lacquers, urethanes, epoxies, sealers (thin as required) |
| Typical Uses | Cabinetry, furniture, auto refinish parts, metal fab, plastics, general finishing |
What’s Included
- Finex 289245 gun (gravity-feed)
- Air cap + 1.5 mm needle/nozzle
- Gravity cup
- Basic tool kit & documentation
Frequently Asked Questions
No. The 289245 Finex is a stand-alone air spray gun. It does not mount to airless sprayers or pump systems. It connects to a compressed-air line (1/4" NPSM) and uses a gravity cup to feed material.
The 1.5 mm is a versatile size for lacquers, waterborne finishes, urethane clears, and thinned epoxies. Always follow manufacturer reduction and test on scrap to dial in pressure and pattern.
This model is a conventional (non-HVLP) gun. Start with moderate regulated pressure and adjust for atomization while staying within the 100 psi max limit. Use a water trap/regulator for the best results.
The gun has a 1/4" NPSM air inlet. Use a compatible male coupler or whip hose to connect to your shop air line. Keep lines clean and dry for finish quality.
No reviews yet. Be the first to review this product!
