Graco 114176S Spring Strain Relief

Graco 114176S Spring Strain Relief

The Graco 114176S Spring Strain Relief is a precision-engineered component designed to relieve mechanical stress on power cords or cables in industrial and airless spray systems. It helps protect internal wiring by absorbing bending, pulling, and vibration — thereby extending the equipment’s reliability and service life.

Key Features

• Spring-based tension mechanism distributes load evenly around cable sheathing.
• Durable polymer housing offers impact resistance and chemical inertness against solvents.
• Corrosion-resistant stainless-steel spring maintains preload over many cycles.
• Compact, low-profile design fits into tight assemblies.
• Suitable for **industrial and high-pressure environments**, including spray rigs and fluid manifolds.

Technical Specifications

Installation & Maintenance

• Insert the strain relief into a ~12 mm panel cutout and secure via twist-lock.
• Torque the flange nut to ~2 Nm to avoid over-compressing the spring.
• Ensure correct orientation so the knurled end prevents cable rotation.
• Periodically inspect for housing cracks, spring preload, and wear during routine maintenance.
• If replacing, recalibrate spring preload if required.

Compatible Machines

• **Generic Graco Equipment** — The 114176 / 114176S is generally listed as used across Graco equipment rather than a single specific model.
• No official model-specific compatibility list is publicly confirmed.
• Always verify via your equipment’s parts diagram or service manual.

Applications

• Industrial spray rigs and finish lines
• Airless sprayer control panels
• Fluid dispensing manifolds handling high-pressure coatings
• Portable pump assemblies with frequent cable movement