Compatible Machines for the Graco 114683 Packing O‑Ring
- Graco LineLazer IV 5900 – parts list includes part number 114683 “Packing, O‑Ring”.
- Any Graco machine where the parts diagram lists part number 114683 – Packing, O‑Ring.
Product Overview
The 114683 Packing O‑Ring from Graco is a genuine OEM seal designed to maintain leak‑free performance in high‑pressure spray/line‑striping equipment. By ensuring proper sealing in critical assemblies, it helps protect your machine from fluid loss, contamination and operational downtime.
Key features include:
- OEM‑specified part for correct fit and material in Graco equipment. :contentReference[oaicite:6]{index=6}
- Designed for use in walk‑behind line stripers and similar Graco machines where fluid sealing is required. :contentReference[oaicite:7]{index=7}
- Helps prevent leaks, maintain system integrity and minimise maintenance stoppages.
Why Choose This O‑Ring?
If your machine’s parts list specifies part number 114683, using this exact OEM O‑ring ensures you preserve the original specification, material compatibility and seal performance. Using a non‑OEM or incorrect size may result in leaks, shortened part life or system failure.
Frequently Asked Questions
If you notice fluid leaks, erratic pressure behaviour, or the O‑ring appears cracked, flattened or deformed, it’s time to replace the O‑ring. Inspect the sealing surface and ensure the replacement matches the OEM part number 114683.
While a generic O‑ring might fit, the OEM part guarantees correct specification—material, size and compatibility. For best results in high‑pressure spray equipment, use the genuine part number 114683. :contentReference[oaicite:8]{index=8}
Ensure the machine is powered off and depressurised, clean the sealing groove, remove old O‑ring, lightly lubricate with compatible lubricant (if recommended), install the new O‑ring with correct orientation and ensure no twist or damage before re‑assembly.
