Compatible Equipment for the Graco 114835 Time-Lag Fuse (4 A, 250 V)
- Any Graco electric-powered equipment, spray system or control module whose wiring harness or parts list specifies 114835 – Fuse, 4.0 Amp, 250 V, Time-Lag. :contentReference[oaicite:4]{index=4}
- Sprayers, controllers, or fluid-handling units with fuse-holders designed for 4 A/250 V time-lag fuses (as specified in the manufacturer’s wiring diagram). :contentReference[oaicite:5]{index=5}
Product Overview
The 114835 Time-Lag Fuse is a genuine OEM protective electrical fuse from Graco, rated at 4.0 Amp, 250 V. It safeguards the equipment’s electrical circuits by allowing brief current surges (like startup spikes) to pass without blowing — but will “blow” (open the circuit) under sustained over-current, protecting wiring, components, motors or control modules from damage. :contentReference[oaicite:6]{index=6}
Key features include:
- Electrical protection — prevents damage to wiring or components in case of overload or short circuit. :contentReference[oaicite:7]{index=7}
- Time-lag characteristic — handles short inrush currents (e.g. at startup) without blowing prematurely, but protects against sustained overload. :contentReference[oaicite:8]{index=8}
- OEM-specified fuse — ensures correct rating and fit, preserving safety standards and compatibility with original equipment. :contentReference[oaicite:9]{index=9}
Why Use This Fuse?
If your Graco equipment’s parts list or service manual calls for fuse number 114835, using this exact fuse ensures proper circuit protection and safe operation. Using a wrong fuse (incorrect amp/voltage or fast-blow instead of time-lag) might result in nuisance blowing or insufficient protection — risking damage to the unit. Since this is a fuse for safety, always replace with correct OEM spec. :contentReference[oaicite:10]{index=10}
Frequently Asked Questions
“Time-lag” fuse allows brief current surges (like motor start-up, switch-on spikes) without blowing — but will blow if over-current continues for longer period, protecting the circuit from damage. :contentReference[oaicite:11]{index=11}
Only if the replacement matches exactly the same rating — 4.0 Amp, 250 V, time-lag type — and fits physically. Using a generic fuse with different rating or “fast-blow” type could cause premature fuse-blowing or unreliable protection. OEM 114835 is recommended when restoring factory configuration.
