Graco 253056 Pump Repair Kit

Genuine Graco 253056 Pump Repair Kit restores your sprayer’s performance by renewing worn fluid section parts. Ideal for professional users maintaining consistent pressure and smooth spray.

Part Number: 253056
Fits: Mark IV, Ultra Max II 1595, GH 200, GH 300 (pump 253056)
Includes: Packings, seals, O-rings, balls & seats
Use: To rebuild or service the fluid section for optimal pressure

Retail Price: $771

You save: $123.36 (16.00%)

Our Price: $647.64

Based on 0 reviews

Description

Overview & Key Details

Compatible Machines

This Graco 253056 Pump Repair Kit fits sprayers that use the 253056 fluid section/pump. Always confirm by checking the pump tag on your unit.

TexSpray Mark IV (models configured with pump/fluid section 253056)
Ultra Max II 1595 Premium (variants built with fluid section 253056)
GH 200 (when equipped with pump 253056—verify pump series)
GH 300 (when equipped with pump 253056—verify pump series)

What is the Graco 253056 Pump Repair Kit?

A genuine Graco kit engineered to restore the fluid section performance by renewing wear components (packings, seals, balls/seats, and O-rings). Using OEM parts maintains pressure consistency, prime/retain, and service life of your sprayer.

Key Features & Benefits

Restores fluid delivery and pressure by renewing pump sealing surfaces.
OEM tolerances for proper ball/seat sealing and smooth check-valve action.
Helps reduce spitting, surging, and hard-to-prime symptoms.
Designed for sprayers using the 253056 fluid section/pump.

Specifications

Part Number	253056
Item Type	Kit, Repair, Pump (fluid section service kit)
Primary Function	Rebuilds the fluid section to restore sealing and pressure performance.
Typical Contents	Packings, seals, O-rings, valve balls & seats, related small hardware.
Compatibility Basis	Fits machines specifically equipped with pump/fluid section 253056.

When Should You Use This Kit?

Loss of pressure or uneven spray pattern
Fluid leaking past packings or rapid pressure drop
Hard priming / pump won’t hold pressure
Excessive wear noted during scheduled maintenance

Installation Tips

Relieve pressure and disconnect power before servicing.
Clean the fluid section thoroughly to prevent debris damage.
Lubricate new packings/seals per Graco instructions during assembly.
Re-torque fasteners to spec; check for leaks on re-prime.
Flush with compatible solvent and verify pressure stability.

Frequently Asked Questions

Match the pump/fluid section number on your sprayer’s parts diagram or the pump tag. If it shows 253056, this is the correct pump repair kit. If the pump number differs, use the kit referenced for that pump.

It fits configurations built with the 253056 fluid section. Some model/series variants use different pumps. Always confirm the pump number in your unit’s manual or on the pump tag before ordering.

Common signs include surging, spitting, difficulty priming, pressure that won’t hold, visible leakage at packings, or a deteriorated spray pattern despite a good tip/filter.

A selection of packings, seals, O-rings, and ball/seat components for the fluid section. Exact contents can vary by production run; check the bill of materials for your model.

If you are comfortable with sprayer maintenance and follow Graco instructions, yes. Otherwise, a professional service center can rebuild and pressure-test the pump for you.