Graco 290228 Burn Warning Safety Label

Graco 290228 Burn Warning Safety Label is a self-adhesive caution decal that alerts users to hot surfaces on Graco sprayers/engines—ideal for maintaining safety and compliance.

Part No.: 290228
Fits: GMAX II 3900, 5900, 7900; TexSpray HD series; others per manual
Easy peel-and-stick replacement
Keeps burn-hazard warnings visible

Based on 0 reviews

Description

Overview & Compatibility for Graco 290228 Burn Warning Safety Label

Compatible Machines

This safety label is used across multiple Graco gas/electric sprayers and texture units where burn-hazard warnings are required.

GMAX 3400
GMAX II 3900 (Standard / ProContractor / IronMan; Rental Pro 360G)
GMAX II 5900 (Standard / ProContractor / IronMan)
GMAX II 7900 (Standard / ProContractor / IronMan)
TexSpray 5900HD
TexSpray 7900HD
LineLazer 3400

Note: This label may also appear on other Graco systems where part 290228 is specified in the official parts manual.

What is it?

The Graco 290228 Burn Warning Safety Label is an adhesive caution decal used to warn operators about hot surfaces and heated fluids on Graco equipment. Replacing worn or missing labels helps maintain safety compliance and clear, visible warnings for end users.

Key Details

Part Number	290228
Item Type	Safety / Caution Label (“Burn Warning”)
Typical Placement	On guards, frames, or near components that can become hot during operation (engine area, pump/muffler zones, etc.)
Purpose	Provides clear burn-hazard notice to operators and bystanders
Replacement Guidance	Replace immediately if label is damaged, faded, or missing to maintain safety visibility

Why Keep This Label Intact?

Maintains clear safety communication on hot-surface areas
Supports operator training and compliance checks
Low-cost preventive safety measure for job-site inspections

Frequently Asked Questions

Yes—Graco safety decals are supplied as self-adhesive stickers for direct application to clean, dry surfaces.

Placement varies by model but is usually near engine, muffler, pump, or other hot-surface areas. Refer to your model’s parts diagram for the exact location.

No. Graco uses multiple label part numbers for different hazards and sizes (e.g., fire/skin, pinch, moving parts). Always match the part number called out in your manual.

Clean the surface thoroughly (degrease, dry), apply at room temperature, and avoid stretching the decal. Press firmly across the entire label to remove air pockets.

It’s not recommended. Missing safety labels reduce hazard awareness and may fail safety inspections. Replace missing or damaged labels immediately.