Graco 19F553 Ultra 695 XT Standard Series Electric Airless Sprayer, Lo-Boy

Graco 19F553 Ultra 695 XT Standard Series Lo-Boy delivers professional performance for medium to large painting jobs. Built with a powerful motor and easy-service ProConnect system for maximum uptime.

2.1 HP Xtreme Torque electric motor
Up to 3300 psi operating pressure
Flow rate: 1.05 GPM
Supports up to 0.031” tip size
ProConnect pump for fast replacement
Ideal for large residential & commercial coatings

Retail Price: $6210

You save: $1821 (29.32%)

Our Price: $4389

Based on 0 reviews

Description

Overview & Key Specs

Compatible Machines

This is a complete sprayer unit, so it does not “fit” into another machine. For clarity, here are the primary system components and accessory families that the Graco 19F553 Ultra 695 XT Standard Series Electric Airless Sprayer, Lo-Boy is designed to work with:

Graco Contractor PC-series airless spray guns (and similar Graco professional airless guns)
RAC X SwitchTips, including RAC X LP and FF LP tips (up to the sprayer’s rated max tip size)
BlueMax II high-pressure airless hoses (e.g., 1/4" and 3/8", rated ≥ 3300 psi)
Graco tip extensions, CleanShot valve, pressure roller kits, and related pro accessories
Graco inlet strainers, manifold filters (60–100 mesh typical), and pump protection accessories
ProConnect serviceable pump assembly designed for the Ultra 695 XT platform

About the Product

The Graco 19F553 Ultra 695 XT Standard Series Electric Airless Sprayer, Lo-Boy is a professional-grade electric airless sprayer engineered for high productivity on medium-to-large residential, commercial, and maintenance jobs. It combines a robust Xtreme Torque electric drive with smart pressure control and a service-friendly ProConnect pump interface to keep you spraying with less downtime.

Key Specifications

Series / Config	Ultra 695 XT — Standard Series, Lo-Boy cart
Motor	Approx. 2.1 HP Xtreme Torque electric drive
Max Working Pressure	Up to 3300 psi
Flow Rate	Approx. 1.05 GPM (gallons per minute)
Max Tip Size	Up to 0.031" (within material/pressure limits)
Pressure Modes	Low-Pressure Mode (~50–2000 psi) and High-Pressure Mode (~500–3300 psi)
Typical Materials	Primers, acrylics, enamels, elastomerics, and many architectural coatings (check manufacturer recommendations)
Display & Control	Digital/LED pressure display with rapid-response pressure control
Serviceability	ProConnect quick-swap pump, WatchDog pump protection, easy-clean filtration

Why Pros Choose the Ultra 695 XT

High productivity: Flow and pressure headroom for longer hose runs and larger tips.
Finish flexibility: Low-pressure capability for overspray control with LP/FF LP tips.
Uptime focused: ProConnect pump swaps reduce job-site downtime.
Durable build: Heavy-duty drivetrain and filtration for daily professional use.
Lo-Boy convenience: Low center of gravity, easy pail access and transport.

Recommended Applications

Interior & exterior repaint, new construction, commercial maintenance
Large wall/ceiling areas, siding, block/CMU, tilt-up, light elastomerics
Projects requiring long hose runs and consistent atomization

What’s in the Box*

*Package contents may vary by region or bundle. Check the “Included” tab on your specific SKU before purchase.

Ultra 695 XT Lo-Boy sprayer unit
Professional airless spray gun (e.g., Contractor PC-series)
RAC X SwitchTip & guard (often LP tip for low-pressure spraying)
High-pressure BlueMax II hose (length/diameter varies by kit)
Inlet strainer, manifold filter, owner’s manual

Frequently Asked Questions

The sprayer supports tips up to approximately 0.031", provided the coating and pressure settings are appropriate. Always match tip size to material, desired flow, and surface, and ensure the hose and gun are rated for 3300 psi.

Yes. Use Low-Pressure Mode with RAC X LP or FF LP tips for reduced overspray and finer finish control while maintaining good production rates.

Use BlueMax II or equivalent Graco high-pressure airless hoses rated at ≥ 3300 psi. Select 1/4" or 3/8" I.D. based on hose length and flow needs; longer runs often benefit from a 3/8" main line with a 1/4" whip.

ProConnect allows quick pump removal and replacement without special tools, minimizing downtime if a pump needs service. Keep a spare pump on hand to swap and keep spraying.

Typical architectural coatings such as primers, acrylics, latex paints, enamels, and some elastomerics are appropriate. Always check coating manufacturer guidance for airless tip size and pressure, and strain/thin as required.