Graco 061134 Hose Nylon 3/8 Id Wpr 200

Compatible Machines

• Not model-specific: This bulk fluid hose fits any Graco finishing/dispensing setup that requires a 3/8" ID nylon hose with 200 psi working pressure.
• Common use across industrial liquid finishing lines, paint/coating circulation loops, catalyst/waterborne material feed lines, sealant & adhesive systems, and general fluid transfer where nylon hose is specified.
• Verify your equipment’s hose ID, pressure rating, and chemical compatibility before ordering/cutting.

Product Overview

The Graco 061134 (Hose, Nylon, 3/8" ID, WPR 200) is a bulk fluid hose designed for catalyst and waterborne materials in industrial finishing applications. Supplied in long lengths for custom runs, it’s ideal for building or replacing fluid lines to match your layout.

Key Specifications

Benefits & Use Cases

• Flexible layout: Bulk format lets you route precise lengths with fewer unions.
• Chemistry-ready: Nylon construction suitable for many catalyst & waterborne fluids (verify your chemistry).
• Dimension match: Standard 3/8" ID for common Graco fluid circuits operating ≤ 200 psi.

Selection & Compatibility Notes

• Confirm required hose ID, working pressure, and chemical compatibility with your equipment manual.
• For higher pressures or aggressive solvents, choose the appropriate rated/braided or PTFE-lined hose.
• Order correct end fittings to match your pump/sprayer/manifold connections.

Installation Tips

• Cut cleanly with a sharp hose cutter; avoid ovalizing the ID.
• Use proper ferrules/push-to-connects per fitting maker’s instructions.
• Pressure-test the line before placing into service; re-check after first use.
• Support long runs with clips or trays to reduce vibration and wear.

Frequently Asked Questions