Compatibility & Overview
Graco 061195 Nylon Braided Fluid Hose is a flexible industrial finishing hose designed for catalyst and waterborne materials. With a 3/8 in ID and a working pressure of 300 psi (21 bar), it’s suitable for low-to-medium pressure finishing lines, metering/mixing setups, and spray-booth fluid runs where chemical compatibility and flexibility are key.
Compatible Machines / Systems
This is a universal fluid hose section. Compatibility depends on your fittings, pressure rating, and hose path. It is commonly used with the following Graco finishing equipment families (verify thread sizes and adapters):
- Graco liquid finishing systems (manual/automatic air spray & air-assisted airless lines)
- Plural-component mixing/metering setups (e.g., mix manifolds and fluid supply lines)
- Spray-booth fluid distribution, pumps-to-gun runs, and hose reel feeds
- General fluid transfer on industrial finishing skids within 300 psi (21 bar) limits
Key Specifications
| Part Number |
061195 |
| Hose Type |
Nylon Braided Fluid Hose (flexible, finishing-grade) |
| Inner Diameter |
3/8 in (≈ 9.5 mm) |
| Max Working Pressure |
300 psi (21 bar) |
| Material Compatibility |
Waterborne materials, catalyst (check chemical resistance for your specific fluid) |
| Typical Use |
Industrial finishing lines, spray-booth runs, metering/mixing manifolds, transfer lines |
| Fittings |
Supports reusable build-up with standard hose end fittings (match to your thread type/size) |
Features & Benefits
- Engineered for catalyst and waterborne materials used in finishing
- 3/8 in ID flow path for reliable delivery over common booth distances
- 300 psi (21 bar) rating covers low-to-medium pressure finishing circuits
- Flexible construction for easier routing on skids and spray-booth walls
- Reusable-style end fitting support helps streamline maintenance and custom lengths
Fit & Selection Guidance
- Verify port thread and adapter style on pumps, manifolds, and guns
- Confirm your process stays within 300 psi (21 bar) working pressure
- Check chemical compatibility for your specific coatings and catalysts
- Choose length to minimize pressure drop while ensuring ergonomic reach
Frequently Asked Questions
It’s a universal 3/8 in ID finishing hose. Fit depends on your machine’s thread type, required adapters, and pressure rating. Check your equipment manual for the recommended hose/fittings and ensure the 300 psi (21 bar) rating is suitable.
Yes. It is designed for waterborne materials and catalyst use in industrial finishing. Always verify chemical compatibility for your exact formulation.
Keep runs as short as practical to reduce pressure drop and improve response. Ensure enough slack for routing, safety, and maintenance access in the booth or on the skid.
The hose supports reusable-style build-up with appropriate hose ends. Follow the fitting manufacturer’s assembly and torque instructions for safe operation.
Use a hose rated above your system’s maximum working pressure. For higher-pressure airless or transfer applications, select a hose with a higher psi rating specified by Graco for that model.
