Graco 100058 Screw Cap Hex Hd
$7.20
Available to Order
The Graco 100058 Screw, Cap, Hex Head is a genuine OEM fastener designed for secure and reliable assembly in multiple Graco sprayer systems. Ideal for stands, frames, and guard installations.
- Part Number: 100058
- Thread Size: 1/4-20 × 1.5″ (38 mm)
- Used In: Triton 1:1, Merkur ES, LineLazer IV 250, PrecisionMix II
- Type: Hex Head Cap Screw
- Genuine Graco Replacement Part
Quantity
Genuine OEM Part
Fast Shipping (Order by 1 PM CST)
Easy Returns
Overview & Compatibility for Graco 100058 — Screw, Cap, Hex Head
Compatible Machines / Systems
The Graco 100058 is a factory fastener used across multiple Graco assemblies. Confirm with your unit’s parts manual, but it is explicitly called out in the following families:
- Triton 1:1 Spray Packages (Wall-Mount packages; models commonly listed include: 233487, 233488, 233489, 233490, 233491, 233492, 234917, 234918, 233748, 233749, 289622, 289623, 289624, 289625, 289626, 289627, 289628, 289629, 289630, 289631, 2008001)
- Merkur ES Spray Packages (stand kit hardware; appears as “screw, cap, hex hd; 1/4-20 × 1.5 in”)
- LineLazer IV 250 Series (e.g., 250SPS, 250DC; used in frame/guard hardware locations)
- PrecisionMix II Systems (fastener in cabinet/assembly hardware)
Key Specifications
| Graco Part # | 100058 |
|---|---|
| Graco Nomenclature | SCREW, cap, hex hd |
| Thread / Size | 1/4-20 (UNC) |
| Length | 1.5 in (38 mm) |
| Head Style | Hex Head Cap Screw |
| Material | Not specified by Graco (use original spec from your manual if a specific grade/finish is required) |
| Typical Use | Factory hardware for stands, brackets, guards, and general assembly points |
| Package Contents | 1 × Screw (sold each) |
Why Choose the Genuine Graco 100058?
- Ensures correct thread length & engagement at critical mounting points.
- Matches OEM fit & fastening torque to prevent vibration loosening.
- Maintains equipment safety labels, guards, and brackets in designed positions.
Installation Notes
- Remove old hardware and inspect mating threads (repair or chase if damaged).
- Position the bracket/guard; start threads by hand to avoid cross-threading.
- Tighten to the torque value given in your manual (if torque not listed, tighten firmly without over-stressing the threads).
- Apply a thread-locker only if specified by Graco for that location.
Frequently Asked Questions
Functionally yes—it’s a 1/4-20 × 1.5″ hex head cap screw. However, using the genuine Graco part ensures the correct finish, quality, and compliance with the assembly’s original specification.
It appears in manuals for Triton 1:1 Spray Packages (multiple wall-mount models), Merkur ES Spray Packages (stand kit hardware), LineLazer IV 250 Series (e.g., 250SPS & 250DC), and PrecisionMix II Systems. Always cross-check your specific model’s parts list.
Quantity varies by assembly point. Many wall-mount or stand kits call for four to six, while some LineLazer locations call for one. Refer to your model’s exploded diagram for exact quantities.
Only if the parts manual permits it. Changing grade/finish can alter clamp load, corrosion behavior, and torque. When in doubt, use the OEM spec or purchase the genuine Graco 100058.
No reviews yet. Be the first to review this product!
