Graco 100483 Fitting Tee Pipe
$88.75
Available to Order
The Graco 100483 Fitting, Tee – Pipe is an OEM 3/8 NPT tee designed for fluid line branching in Graco sprayer and pump systems.
- Part Number: 100483
- Thread Size: 3/8 NPT
- Type: Tee Pipe Fitting
- Use: Splits or joins fluid paths in Graco pump manifolds
- Fits: Graco 224-522, 222-252 pump models
Quantity
Genuine OEM Part
Fast Shipping (Order by 1 PM CST)
Easy Returns
Overview: Graco 100483 Fitting, Tee – Pipe
Compatible Machines
- Graco cart-mounted pump Model 224-522 (used in plumbing schematic with Tee 100483)
- Graco cart-mounted pump Model 222-252 (legacy predecessor using Tee 100483)
Key Specifications
| Part Number | 100483 |
|---|---|
| Type | Fitting, Tee – Pipe (three-port tee for branching a fluid line) |
| Thread Size / Standard | 3/8 NPT (appears in Graco plumbing/parts documentation) |
| Typical Location | Fluid plumbing/manifold area (e.g., branches to drain/return or auxiliary line) |
| Applications | General fluid handling / airless spray plumbing where a tee branch is required |
| Material | Not explicitly specified in public listings — verify per your model’s parts manual if material compatibility is critical |
What It Does
The Graco 100483 is a pipe tee fitting used to split or combine fluid paths in a pressure line. It is commonly found in drain/return branches, priming lines, or auxiliary take-offs in Graco pump and sprayer plumbing.
Features & Benefits
- OEM geometry for correct thread engagement and alignment
- 3/8 NPT threads for common Graco fluid circuits
- Branching made simple: add drain/return or auxiliary line without re-plumbing the system
Fit & Installation Tips
- Confirm your model’s parts diagram lists 100483 and verify the required 3/8 NPT size.
- Use PTFE tape or a Graco-approved thread sealant on NPT threads; avoid over-tightening to prevent cracks or leaks.
- After installation, pressure-test and check all joints for seepage before returning to service.
Frequently Asked Questions
Yes—public Graco documentation references 100483 as a 3/8 NPT pipe tee used in pump plumbing. Always confirm size against your machine’s manual.
Confirmed usage appears on Graco cart-mounted pump 224-522 (legacy 222-252) plumbing. Other models may also use it—verify by checking the parts list for your exact sprayer/pump.
Match the part number (100483) in your model’s parts manual and ensure your ports are 3/8 NPT. If unsure, share your model & serial for confirmation.
The tee itself has no wetted seals, but material compatibility (tee and adjacent components) must meet the chemistry used. Follow the chemical compatibility guidance in your Graco manual.
Yes—use PTFE tape or a Graco-approved sealant on NPT threads. Apply sparingly and re-torque after the first pressure test if needed.
No reviews yet. Be the first to review this product!
