Graco 15F782 Transducer Harness

Product Overview

The Graco 15F782 Transducer Harness is a genuine OEM wiring harness and transducer assembly designed for use in Graco line‑striping and spray machines. It connects the pressure/flow transducer to the control module, enabling accurate pressure monitoring, signal transmission, and safe, consistent operation of the equipment.

Key Features

• OEM‑grade harness: Genuine Graco component for perfect fit and reliable signal transmission.
• Accurate pressure monitoring: Enables correct feedback from the transducer to control board ensuring safe operation.
• Durable wiring & insulation: Built to withstand harsh working conditions typical of line‑striping and spray applications.
• Simple plug‑and‑play installation: Designed for straightforward replacement without major rewiring.
• Essential for safety: Prevents over‑pressurization by enabling control system to monitor pump pressure correctly.

Specifications

Maintenance & Installation

• Power off and depressurize the machine before removing or installing the harness to avoid short‑circuits or damage.
• Check connector pins and wiring insulation for wear or damage — replace harness if insulation cracks or wires are exposed.
• Ensure all transducer seals and O‑rings are intact to prevent leaks or incorrect pressure readings.
• After installation, verify correct signal transmission and that the pressure gauge/monitor reads correctly under test pressure before normal operation.
• Inspect harness routing periodically to avoid rubbing against sharp edges, which could damage insulation over time.

Frequently Asked Questions