Graco 15G195 Inlet Housing 4 GPM

Product Overview

The Graco 15G195 Inlet Housing 4 GPM is an OEM‑grade inlet housing designed for 4 GPM fluid pumps and sprayer systems. It serves as the main intake housing for the pump’s fluid supply line — connecting suction hose or fluid reservoir to internal pump components, thereby ensuring correct fluid intake and reliable pump operation under typical or high‑pressure spray conditions.

Key Features

• OEM‑grade housing: Genuine Graco part delivering exact fit and compatibility with 4 GPM pumps.
• Reliable fluid intake: Securely channels fluid from reservoir or suction line into the pump.
• Durable construction: Built to withstand pressure, frequent use and fluid variations typical in spray/coating operations.
• Corrosion & wear resistant: Engineered to resist chemical exposure and mechanical stress over long-term use.
• Direct replacement: Designed for easy swap with original inlet housing — simplifies maintenance or pump rebuild.

Specifications

Installation & Maintenance Guidelines

• Depressurize and drain the sprayer/pump before removing or installing the inlet housing.
• Clean suction hose, fluid reservoir, and pump intake area before fitting to avoid debris or contamination.
• Install 15G195 ensuring proper alignment and secure all fasteners as per manufacturer’s guidelines.
• After installation, run a test cycle with clean fluid to verify proper intake and absence of leaks.
• Inspect the housing periodically for cracks, wear, or signs of corrosion — replace if any damage is detected to maintain safe operation.

Frequently Asked Questions