Graco 100680 Screw Cap Hex Hd
$30.90
Available to Order
The Graco 100680 Screw Cap Hex HD is a genuine OEM fastener designed for use in multiple Graco ThermoLazer and ProMelt models. It ensures secure assembly and long-lasting performance.
- Part Number: 100680
- Type: Screw, Cap, Hex Head (3/8-16 x 7/8")
- Fits: ThermoLazer 200 / 200TC, ProMelt 24H624 & 24H626
- Brand: Graco OEM
Quantity
Genuine OEM Part
Fast Shipping (Order by 1 PM CST)
Easy Returns
Graco 100680 — Screw, Cap, Hex Head (Hex HD) Overview
The Graco 100680 is an OEM Screw, Cap, Hex Head (Hex HD) used on select Graco pavement marking and thermoplastic units. It’s a standard 3/8-16 hex cap screw commonly referenced in Graco service parts lists.
Compatible Machines
This part appears in Graco service manuals for the models listed below. Always verify against your unit’s parts list by model & serial.
- Graco ProMelt — 24H624
- Graco ProMelt — 24H626
- Graco ThermoLazer 200
- Graco ThermoLazer 200TC
Key Specifications
| OEM Brand | Graco |
|---|---|
| Part Number | 100680 |
| Common Name | Screw, Cap, Hex Head (Hex HD) |
| Thread / Size | 3/8-16 UNC, length approx. 7/8 in. (verify in your manual) |
| Typical Use | Fastening structural/assembly points on ThermoLazer / ProMelt units (location varies by model). |
Highlights
- Genuine Graco replacement hardware for reliable fit and service life.
- Standard 3/8-16 hex cap style simplifies installation with common tools.
- Listed in official Graco service parts manuals for the models above.
Installation & Fit Notes
- Match length and thread to the original fastener from your unit.
- Use appropriate washers/lock hardware if your assembly calls for them (not included unless specified).
- Tighten to equipment-appropriate torque; re-check after initial use.
- Confirm placement using your model-specific Graco parts list or schematic.
Package Contents
- 1 × Graco 100680 Screw, Cap, Hex Head (Hex HD)
Frequently Asked Questions
Yes—100680 is a genuine Graco part number referenced in Graco service parts lists for select ThermoLazer/ProMelt models.
No. This listing is for the hex cap screw only. Reuse your existing hardware or order compatible washers/nuts as specified by your unit’s parts list.
Check your machine’s model and serial against the latest Graco service manual. Match the fastener’s thread (3/8-16) and length to the component callout on your schematic.
Length may vary by assembly point. Many listings reference ~7/8″, but always verify the required length for your specific mounting location.
The 100680 is a UNC (3/8-16) fastener. If your model uses metric at that location, consult the manual for the correct metric part number instead of 100680.
No reviews yet. Be the first to review this product!
