Graco 101713 Hex Hd Screw Cap
$13.60
Available to Order
The Graco 101713 Hex Hd Screw Cap is a durable fastening bolt designed for air-motor and pump assemblies. It provides reliable structural strength and secure component alignment.
- Thread: 7/16-14 (UNC)
- Length: Approx. 3-1/2"
- Used In: Graco air motors 217540, 624250, 249441, 208357
- Function: Fastens motor housing for stability
Quantity
Genuine OEM Part
Fast Shipping (Order by 1 PM CST)
Easy Returns
Compatible Machines
- Graco Air Motor Model 217540 (Series C)
- Graco Air Motor Model 624250 (Series A)
- Graco Air Motor Model 249441 (Series A)
- Graco Air Motor Model 208357 (Series J) — Bulldog-series air motor
Product Overview
The Graco 101713 Hex Hd Screw Cap is a hex-head cap screw used in multiple Graco industrial air-motor assemblies to clamp and secure critical housings. Listed in Graco technical documentation as a 7/16-14 cap screw approximately 3-1/2" long, it is engineered to maintain alignment and reliability under high-cycle operation.
Key Specifications
| Part Number | 101713 |
|---|---|
| Type | Hex Head Cap Screw (cap screw, hex head) |
| Thread Size | 7/16-14 (UNC) |
| Length (reference) | 3.50" (3-1/2") — confirm per your model’s parts list |
| Typical Usage | Air-motor / pump assembly fastening (internal structural locations) |
| Quantity in Assembly | Varies by model (often multiple). Check your specific manual. |
Benefits
- Correct thread engagement and length for supported Graco air-motor assemblies
- Maintains housing alignment and mechanical integrity
- Supports reliable operation under high duty cycles
Fitment & Installation Notes
- Match the model & series on your data plate to the compatible list above.
- Inspect threads and seating surfaces; replace any damaged fasteners in sets when required.
- Torque to the value specified in your Graco service manual for a 7/16-14 cap screw in that location.
Frequently Asked Questions
This fastener is used inside air-motor / pump assemblies. If your sprayer uses an air motor listed in the Compatible Machines section (e.g., 217540, 624250, 249441, 208357), 101713 is typically the correct cap screw. Always confirm in your parts manual for your serial and series.
Manuals list 7/16-14 UNC thread and approximately 3-1/2" length for this cap screw in the referenced air motors. Verify your exact location and torque spec in the machine’s manual.
The quantity varies by air-motor model and by location within the assembly. Some configurations use multiple fasteners of the same part number. Check the exploded parts diagram for your specific model & series.
Substitutions are not recommended. The correct length, thread, and grade ensure proper clamping and alignment. Use genuine Graco parts or an exact-spec equivalent confirmed by your service documentation.
No reviews yet. Be the first to review this product!
