Please wait while we process your order...

Product successfully added to your cart.
Cart Image

Quantity in Cart: 1

Continue Shopping Shopping Cart
Item removed from Cart
X
 
×
📢 From June 8th to 25th, phone support will be limited. For assistance, please email us and we will respond as promptly as possible. Orders will continue to be processed normally.

sprayersandparts Logo

Product Image

Graco 164913 Packing Vee PTFE

Graco 164913 Packing Vee, PTFE — genuine PTFE throat V-packing for Graco displacement pumps, controls leakage and reduces wear. Use when your pump’s parts list specifies 164913.

  • Location: throat seal (V-packing)
  • Material: PTFE for low friction & broad chemical resistance
  • Fits: Monark 23:1 (223596, 237958), President 46:1 (239140) — verify by manual

$37.9
0
Based on 0 reviews
5 ★
0%
4 ★
0%
3 ★
0%
2 ★
0%
1 ★
0%

Product Overview & Fitment

This Graco 164913 Packing, Vee, PTFE is a genuine throat V-packing used in select industrial displacement pumps to seal the throat area and reduce leakage under high pressure.

Compatible Machines

  • Graco Monark 23:1 Displacement Pump — Model 223596 (Carbon Steel)
  • Graco Monark 23:1 Displacement Pump — Model 237958 (Stainless Steel)
  • Graco President 46:1 Displacement Pump — Model 239140 (Stainless Steel)
  • Other Graco displacement pumps that specify part 164913 in their official parts list (verify by model manual).

Key Details

Part Number 164913
Part Name Packing, Vee (Throat)
Material PTFE (Teflon)
Function / Location Seals the throat area of the displacement pump to control fluid leakage and reduce wear.
Typical Assemblies Monark / President series displacement pumps and other assemblies that list 164913.
Related Part 164912 (often referenced as the piston V-packing in similar pumps; confirm per manual).

Benefits

  • PTFE provides broad chemical resistance and low friction for smooth operation.
  • Genuine fit for pumps that explicitly list 164913 in the parts diagram.
  • Helps maintain prime, reduce leakage, and extend service intervals when installed correctly.

Installation Notes

  • Depressurize equipment and follow the service procedure in the pump’s manual.
  • Inspect the packing bore and rod for damage; clean and lightly lubricate as specified.
  • Install V-packing with lips oriented as shown in the assembly diagram for your model.
  • After reassembly, test for leaks at low pressure before returning to full operation.

Frequently Asked Questions

It is the throat V-packing. Many related pumps use a separate piston V-packing (commonly listed as 164912). Always confirm your model’s diagram.
Check the parts list for your exact pump model. If the manual specifies 164913 for the throat position, this is the correct part. When in doubt, match by model and serial.
PTFE has broad chemical compatibility, but you should verify your fluid against the manufacturer’s compatibility guidance and your pump’s wetted-parts specification.
Replace when you see persistent throat leakage, loss of prime, or after major pump service. Harsh fluids, abrasives, and high cycle counts may shorten service life.

Payment Method   Payment Method   Payment Method   Payment Method 

ADDRESS