Graco 101891 Tip Brush

The Graco 101891 Tip Brush is a reliable cleaning tool designed to maintain optimal spray performance and extend the life of your equipment.

Part Number: 101891
Bristle Type: Nylon, 3/8″ × 2.25″
Use For: Cleaning spray tips, tip guards, guns, and filters
Fits: Most Graco airless spray guns and tip/guard assemblies

$21.6

Based on 0 reviews

Description

Compatible Machines & Guns (Use-Cases)

Graco Contractor & Contractor II Guns — cleaning spray tips, tip guards, and gun inlets
Graco FTx Series Guns (2-finger & 4-finger)
Graco Silver Plus Guns
Magnum DIY Sprayers (e.g., X5, X7, ProX17, ProX19, ProX21) — for the tips/guards used on these units
Ultra & Ultra Max II Airless Sprayers (490/495/595/695/795/1095/1595 families)
GMAX II & GH Series (3900/5900/7900 and similar) — maintenance of their gun tips/guards
Mark V / Mark X HD & TexSpray families — tip & guard cleaning for texture/airless guns
Any Graco airless spray gun, tip, guard, or filter assembly that accommodates a 3/8″ nylon cleaning brush

Product Overview

The Graco 101891 Tip Brush is a maintenance accessory designed to clean spray tips, tip guards, filters, and guns. Its compact profile reaches common buildup points to help prevent clogs and keep spray patterns consistent.

Key Specifications
Part Number	101891
Type	Tip / guard / filter cleaning brush
Bristle Material	Nylon
Brush Size	3/8″ diameter × 2.25″ length (approx. 9.5 mm × 57 mm)
Typical Use	Clearing dried coating from spray tips, tip guards, and gun filter seats
Compatibility	Works with most Graco airless guns and tip/guard assemblies that accept a 3/8″ brush

Benefits

Helps prevent clogs and maintain an even spray pattern
Supports longer life for spray tips and filters
Compact size reaches tight areas in tip guards and gun inlets

Notes on Fit

This is a universal cleaning tool (not a machine-installed spare). It’s used on the tips/guards and filters associated with the listed Graco sprayer families and guns.
If using non-Graco guards or unusually large tips, verify a 3/8″ brush is appropriate.

Frequently Asked Questions

No. It’s a maintenance accessory for cleaning tips, tip guards, and filters. It’s suitable for most Graco airless guns and sprayer families listed above that use standard tip/guard assemblies.

The brush uses nylon bristles, which are suitable for routine cleaning. Avoid excessive force and always flush with appropriate solvent or water per coating manufacturer and equipment manual.

Choose a larger cleaning brush size if needed. For many users, 3/8″ × 2.25″ is ideal for everyday tip/guard cleaning; verify fitment if you use oversized guards or non-standard accessories.