Graco 165104 PTFE Vee Packing
$40.01
$43.30
Save 8%
In Stock
Graco 165104 PTFE Vee packing for the pump’s fluid section—low-friction, chemical-resistant seal to restore pressure and prevent leaks.
- Material: PTFE (Teflon) V-packing
- Role: Seals the packing stack; reduces wear
- Location: Fluid/pump section
- Use: Pump rebuilds and preventive maintenance
- Fits: Ultra 395/495/595, Ultra Max II 695/795, 1095, 1595 (verify variant)
Quantity
Genuine OEM Part
Fast Shipping (Order by 1 PM CST)
Easy Returns
Overview & Uses of This Seal
Compatible Machines
Verified from aftermarket references. Always cross-check your specific pump assembly before ordering.
- Graco Ultra 395
- Graco Ultra 495
- Graco Ultra 595
- Graco Ultra Max II 695
- Graco Ultra Max II 795
- Graco 1095 (Contractor series)
- Graco 1595 (Contractor series)
Product Overview
Graco 165104 is a PTFE Vee packing used in the fluid section to maintain pressure and prevent leakage during operation. Its PTFE construction provides low friction and chemical resistance for longer service life in demanding spraying environments.
Key Specifications
| Attribute | Detail |
|---|---|
| Part Number | 165104 |
| Description | Packing, Vee (PTFE) |
| Material | PTFE (Teflon) |
| Function | Seals the pump’s fluid section to maintain pressure and reduce leaks |
| Typical Location | Fluid/pump section (within the packing stack) |
| Use Case | Pump rebuilds, maintenance intervals, restoring pressure/prime |
Fitment & Installation Notes
- Confirm your model’s pump diagram to ensure this packing is specified in the stack.
- Inspect mating surfaces and replace worn components in the stack for best results.
- Follow torque and orientation guidelines in the machine manual when rebuilding.
Frequently Asked Questions
Match your model and pump assembly against the parts diagram. Look for the exact part number in the packing stack callout.
Observe orientation of each packing in the stack, lubricate as specified, and torque components to manual specs to avoid premature wear.
Difficulty priming, loss of pressure, material bypass, or fluid weeping from the pump indicate the packing stack needs service.
No reviews yet. Be the first to review this product!
