Graco 166062 Gland Pkg Female

Overview & Key Details

The Graco 166062 Gland Pkg Female is the female gland packing component used in the lower section of select Graco industrial pump assemblies. It helps seal the displacement rod to prevent fluid leakage and maintain pressure integrity.

Compatible Machines / Assemblies

Listed below are the Graco pump lowers and system families where this gland appears in the service parts list. Always confirm against your exact model’s parts book before ordering.

• Stainless Steel 1000cc Lower – Model 253596 (Series A)
• Dura-Flo pump assemblies that specify 166062 in the lower repair parts
• Industrial finishing / circulation systems using the 1000cc lower with 15J781 outlet housing

Why Replace the Gland

• Visible seepage at the lower throat or difficulty maintaining pressure.
• Scheduled packing service—often replaced together with V-packings during lower rebuilds.
• To preserve finish quality and reduce downtime on multi-shift production lines.

Fitment Guidance

• Check your pump’s instruction/parts manual; verify that “166062 – Gland, Pkg Female” is listed.
• Match by lower assembly (e.g., 1000cc Stainless Steel Lower 253596) rather than by sprayer package name alone.
• If your manual pairs a male gland (166061) and PTFE V-packings with this gland, you’re on the correct lower family.

Installation Notes (General)

• Install V-packings in the specified orientation for your manual (commonly lips facing toward fluid side).
• Lubricate packings and rod during assembly; observe any bearing gap and torque specs defined for your lower.
• After reassembly, pressure-test the system and check for leaks before returning to production.

Frequently Asked Questions