Graco 102022 Bushing, Pipe
$131.50
In Stock
The Graco 102022 Bushing, Pipe is a precision OEM adapter used in mixer and manifold assemblies to ensure a secure, leak-free thread connection. Ideal for maintaining correct NPT thread alignment in high-pressure systems.
- OEM Part: Graco 102022
- Type: Pipe Bushing (Threaded Adapter)
- Used In: Model 948338 & 241808 Static Mixer Controls
- Thread Standard: NPT
- Ensures: Proper sealing and system reliability
Quantity
Genuine OEM Part
Fast Shipping (Order by 1 PM CST)
Easy Returns
Precision Pipe Adapter for Mixer/Manifold Assemblies
Compatible Machines
The Graco 102022 — Bushing, Pipe appears in Graco parts lists for the following equipment families:
- Model 948338 (Series A) — Static Mixer Control
- Model 241808 (Series A) — Static Mixer Control
Graco 102022 Bushing, Pipe — Overview
The Graco 102022 is a factory Bushing, Pipe used as a threaded adapter in plural-component and mixer/manifold fluid paths. It helps transition between manifold outlet threads and downstream fittings or mixers to maintain a sealed, serviceable connection.
Key Details & Specs
| OEM Part | Graco 102022 |
|---|---|
| Item Type | Bushing, Pipe (threaded adapter) |
| Primary Use | Adapts mixer/manifold outlet threads to the required downstream fitting/mixer |
| Thread Standard | NPT (per associated mixer/manifold assemblies) |
| Typical Location | Static mixer control / manifold outlet section |
| Applications | Plural-component systems, seal-critical fluid connections in mixer/manifold blocks |
| Compatibility Note | Confirm thread size and Series (A/B/etc.) in your model’s parts diagram before purchase |
Why Use the OEM Bushing
- Ensures proper fit and seal in Graco mixer/manifold assemblies
- Supports reliable high-pressure operation when installed to spec
- Simplifies maintenance and preserves OEM flow/pressure characteristics
Fitment & Safety Notes
- Depressurize system and follow lock-out/tag-out before servicing any fluid fittings
- Use appropriate thread sealant per Graco guidance; do not over-torque
- Match thread sizes and orientation to the exact manifold/mixer layout for your Compatible Machines above
Frequently Asked Questions
No. This Bushing, Pipe is typically supplied without pre-applied sealant. Use a Graco-approved sealant and follow torque guidance for your manifold/mixer assembly.
Check the parts diagram for your exact model and series (e.g., Model 948338 Series A or Model 241808 Series A). Match the manifold outlet thread to downstream fittings or mixers before ordering 102022.
For high-pressure plural-component systems, OEM-spec components are strongly recommended to ensure sealing, pressure rating, and serviceability. Use Graco 102022 when specified.
At the static mixer control or manifold outlet area to adapt the outlet thread to the required downstream fitting or mixer, as shown in the relevant Graco parts list.
Depressurize fully, inspect threads, apply approved sealant sparingly, and torque to spec. After installation, perform a low-pressure leak test before returning to service.
No reviews yet. Be the first to review this product!
