Graco 167667 Gland Packing Male – OEM Seal Component
Compatible Machines
This Graco 167667 Gland Packing Male fits pump bodies used in the following airless sprayers (verify pump body 215-930 / 918-417 before ordering):
- Graco Ultra 395 / 395 PC (select units)
- Graco Ultra 495 XT
- Graco GMAX II 3900
- Graco Mark V HD
- Graco Magnum X5 / X7
- Graco GH 230 / GH 300 (compatible when using same pump body)
Product Overview
The 167667 Gland Packing Male is part of the pump seal assembly. It works with packings in the throat or piston area of the sprayer to maintain pressure, reduce leakage, and ensure pump performance during coating applications.
Key Functions
- Maintains proper compression of packings in the fluid pump section.
- Supports durable sealing for high-pressure airless spraying.
- Helps prevent coating leakage and premature pump wear.
Replacement Indicators
- Paint leaking from pump rod or throat area.
- Difficulty maintaining spray pressure.
- Worn, damaged, or corroded seal components.
- Recommended replacement during complete pump packing rebuild.
Installation Guidance
- Depressurize and flush sprayer before disassembly.
- Clean all mating parts before reinstalling the gland.
- Lubricate packings and rod with Graco-approved grease.
- Verify packing orientation and torque specs as stated in official pump manual.
Frequently Asked Questions
Yes, this part is an OEM Graco seal component used in compatible airless sprayer pump assemblies.
Check your pump section parts manual. If your throat/piston parts list shows Ref. 10 – Part 167667 Male Gland, then this is the correct part.
Yes, replacing this gland during a full pump rebuild is recommended to maintain optimal sealing and service life.
