Pan-Head Machine Screw — OEM #102234
Compatible Machines
This Graco 102234 Screw Mach PNH is an OEM fastener used across multiple Graco systems. Exact usage varies by model and assembly. Always confirm in your unit’s parts manual.
- Graco airless paint sprayers (various models; verify by parts list)
- Graco texture/application sprayers (various models; verify by parts list)
- Other Graco assemblies where a pan-head machine screw is specified
Key Details
| OEM Part | Graco 102234 |
| Description | Screw Mach PNH (Pan-Head Machine Screw) |
| Head / Drive | Pan-head (drive style per model assembly; see manual) |
| Thread / Length | Varies by application; confirm in your specific model’s parts diagram |
| Use Case | General OEM fastener for covers, brackets, guards, or sub-assemblies |
| Replaces / Supersedes | OEM fastener—use exact part number 102234 for guaranteed fit |
Overview
The Graco 102234 Screw Mach PNH is an original equipment fastener supplied by Graco. Because OEM fasteners can be shared across platforms, this part may appear in multiple models and assemblies. To ensure correct fit, match the part number to your machine’s exploded parts diagram or service manual before ordering.
Fit & Installation Tips
- Locate the fastener callout in your model’s parts list and confirm quantity required.
- Check thread size/pitch and length in the diagram to avoid mixing with similar screws.
- Start threads by hand to prevent cross-threading; tighten to the assembly’s recommended torque.
- If hardware shows corrosion or thread damage, replace as a set for consistent clamping.
What's Included
- 1 × OEM Graco 102234 Screw Mach PNH (unit count may vary by order quantity)
Frequently Asked Questions
Yes—if your parts manual lists 102234. Fasteners can look similar; always match the part number in your machine’s official diagram to ensure proper fit and length.
“PNH” denotes a Pan-Head style machine screw. Drive type and exact dimensions should be verified in the model-specific parts list.
Open the exploded view/parts table for your exact machine. The fastener line item typically lists thread, pitch, and length. If unavailable, measure the removed fastener with a thread gauge and caliper.
It’s best to use the OEM 102234 to preserve fit and safety. If substitution is unavoidable, match head style, material grade, thread pitch, and length exactly, and confirm clearance on guards and covers.
