Precision Flexible Hose for Graco Industrial Pumps — Part 102810
Compatible Machines
- Graco Bulldog® Pump (Model 949444)
- Graco King™ Pump (Model 954180)
- Graco Sanitary Ram Module assemblies (e.g., 248025 / 248026) — used as an exhaust/flex hose in certain configurations*
What is the Graco 102810 Flexible Hose?
The Graco 102810 is a factory replacement flexible hose used on select Graco industrial pumping systems. It provides a durable, kink-resistant connection for fluid/air routing on Bulldog®, King™, and certain sanitary ram module assemblies, helping maintain flow, reduce vibration transfer, and simplify maintenance.
Key Specifications
| Part Number | 102810 |
| Inner Diameter (ID) | Typically 1-1/4″ (verify against your model’s parts list) |
| Length | Commonly 6 ft (1.83 m) on Bulldog®/King™ pumps; some sanitary assemblies list ~5 ft (1.52 m) |
| Typical Use | Flexible connection for fluid/air routing (includes exhaust/muffler hose use on certain assemblies) |
| Construction | Industrial-grade, flexible vinyl/compound hose (model-specific) |
| Fittings/Clamps | Uses model-specific clamps/couplings; match to your unit’s bill of materials |
Quick Fit Reference
| Machine / Assembly | Location / Function | Notes |
| Bulldog® Pump (949444) | Flexible hose connection | Listed as 1-1/4″ ID × ~6 ft. Confirm clamps and adjoining nipple sizes. |
| King™ Pump (954180) | Flexible hose connection | Listed as 1-1/4″ ID × ~6 ft. Verify coupling style per parts diagram. |
| Sanitary Ram Module (e.g., 248025/248026) | Exhaust / muffler hose | Some manuals list ~1″ ID × ~5 ft. Dimensions can differ; check the exact manual for your build. |
Why Choose the 102810 Hose
- OEM fit for select Graco industrial systems
- Flexible & kink-resistant routing in tight installs
- Durable construction for demanding environments
- Service-friendly replacement to restore proper flow and performance
Fitment & Verification Tips
- Match the ID and length listed in your unit’s official parts manual.
- Confirm coupling/clamp types and any adjacent nipples/unions.
- Check operating pressure/temperature requirements for your application.
- If your assembly is sanitary, confirm whether it specifies the exhaust/muffler hose variant.
Frequently Asked Questions
No standard paint sprayer model list is published for 102810. It is documented on industrial pump systems (Bulldog®, King™) and certain sanitary ram modules. For airless sprayers, match by dimensions and bill of materials before purchase.
Many pump manuals list 1-1/4″ ID at approximately 6 ft length for Bulldog®/King™ units. Some sanitary assemblies list around 1″ ID at approximately 5 ft. Always verify against your exact manual and build code.
Clamps and couplings vary by machine. Refer to your parts diagram for the correct clamp range and any required nipples/unions (e.g., stainless clamps sized for 1-1/4″ OD hose on Bulldog®/King™).
Match the part number 102810 directly in your machine’s Graco parts manual. If the manual shows dimensional differences (e.g., sanitary exhaust hose length), use the manual’s spec as the source of truth.
