Graco 103229 Screw Cap Sch
$7.20
Available to Order
The Graco 103229 Screw, Cap, SCH is a genuine socket-head cap screw designed for precise fastening in Graco assemblies like control and heater modules.
- Part Number: 103229
- Type: Socket-head cap screw (SCH)
- Used In: XM PFP, H-20/35 Pro, HV-20/35 systems
- Ensures: Proper torque, secure fit, and OEM reliability
Quantity
Genuine OEM Part
Fast Shipping (Order by 1 PM CST)
Easy Returns
Compatible Machines
- Graco XM PFP Plural-Component Sprayers (models where parts list specifies 103229)
- Graco H-20/35 Pro systems (heater/control assemblies calling out 103229)
- Graco HV-20/35 models (heater/control assemblies calling out 103229)
About Graco 103229 – Screw, Cap, SCH
The Graco 103229 is a screw, cap, SCH (socket-head cap screw) used to fasten control/cover modules and related components in various Graco equipment. It’s a genuine Graco fastener selected to meet assembly clearances, thread engagement, and torque requirements of the specified sub-assemblies.
| Part Number | 103229 |
|---|---|
| Official Name | Screw, Cap, SCH (socket-head cap screw) |
| Head / Drive | Socket-head (hex/Allen drive) |
| Typical Use | Heater/control modules, control boxes, and similar Graco assemblies (per model parts list) |
| Quantity in Assemblies | Commonly specified in sets (e.g., x4) depending on the sub-assembly |
| Material / Finish | Factory-specified Graco fastener (use OEM for correct strength and fit) |
| Dimensions | Thread size/length varies by application; refer to your model’s service manual for exact spec |
Why choose the genuine part?
- Assures correct thread engagement and clamping force in Graco assemblies
- Prevents premature wear of mating parts and maintains safety compliance
- Matches specified torque values and service procedures in OEM manuals
Installation Tips
- Verify the exact location of 103229 in your machine’s parts diagram before installation
- Clean threads; start by hand to avoid cross-threading
- Tighten to the torque specified in the service manual; do not overtighten
- Replace any damaged screws; do not mix lengths or thread types
Frequently Asked Questions
“SCH” refers to a socket-head cap screw style—i.e., a cap screw with an internal hex (Allen) drive and cylindrical head profile.
Check your model’s exploded parts diagram or service manual. If 103229 is listed at your assembly location, it’s the required fastener. Match quantity, thread, and length as shown.
Torque is specified in your equipment’s service manual and may vary by assembly. Use a calibrated torque wrench and follow the OEM values.
Using non-OEM fasteners can affect fit and clamp load, risking damage or loosening. For safety and reliability, use genuine Graco 103229 where specified.
Many assemblies call for multiple screws (often sets of 4). Verify the required quantity for your specific assembly in the parts list before ordering.
No reviews yet. Be the first to review this product!
