Graco 103875 Barb Hose Adapter
$13.30
Available to Order
Graco 103875 Barb Hose Adapter gives a tight, leak-resistant connection from 1/8" NPT (M) ports to 1/4" ID hose. Ideal for hydraulic motor drain/bottle lines and general fluid return on Graco systems.
- Thread → Hose: 1/8" NPT (M) to 1/4" ID
- Use Cases: Viscount I/II hydraulic motors, drain/bottle assemblies
- Install: Sealant on NPT; clamp the hose behind the last barb ridge
- Check: Verify port thread and hose I.D. before ordering
Quantity
Genuine OEM Part
Fast Shipping (Order by 1 PM CST)
Easy Returns
Secure 1/8 NPT to 1/4 in. Hose Connections
Compatible Machines
- Graco Viscount II Hydraulic Motor series (standard & “Quiet” variants)
- Graco Viscount I Hydraulic Motor series
- Pioneer Athletics S90 Field Striper (uses Graco components)
- Any Graco system requiring a 1/8" NPT (M) to 1/4" ID hose barb connection
Product Overview
The Graco 103875 Barb Hose Adapter connects a 1/8" NPT (male) port to flexible tubing with a 1/4" (6.4 mm) ID. It’s commonly used on Graco hydraulic motor drain/bottle assemblies and other fluid lines where a compact, leak-resistant barb is required.
- Correct fit: 1/8" NPT (M) to 1/4" ID hose for secure, reliable hose terminations.
- Versatile use: Fits multiple Graco platforms (hydraulic motors, drain/bottle kits, and general fluid transfer lines).
- Service-friendly: Simple install/removal during routine maintenance.
Technical Specifications
| Part Number | 103875 |
|---|---|
| Type | Adapter, Hose, Barb |
| Thread | 1/8" NPT (Male) |
| Hose Size | 1/4" (6.4 mm) ID |
| Typical Use | Hydraulic motor drain/bottle assemblies, return lines, and general fluid connections on Graco systems. |
Frequently Asked Questions
It adapts a 1/8" NPT (male) outlet to a 1/4" ID flexible hose via a barbed end for a tight, leak-resistant connection.
It appears in parts lists for Viscount I and Viscount II hydraulic motors and is used on equipment like the Pioneer S90 field striper that integrates Graco components. Always confirm thread/hose sizes on your specific unit.
Yes—use a compatible thread sealant or PTFE tape on the NPT threads. Do not apply sealant to the barbed end; secure the hose with a clamp.
Yes, if the port is 1/8" NPT (M) and the hose is 1/4" ID. Check material compatibility with your fluid.
Cut hose square, push fully over the barb, and clamp behind the last barb ridge. Hand-start NPT threads, then tighten to spec without over-torquing.
No reviews yet. Be the first to review this product!
