Graco 104123 Lock Spring Washer
$7.30
In Stock
Genuine Graco 104123 Lock Spring Washer (1/4″). Helps prevent fastener loosening from vibration. Use wherever your parts manual specifies a 1/4″ lock washer.
- Part #: 104123
- Type: Washer, Lock Spring
- Size: 1/4″ (for 1/4-20 hardware)
- Material: Spring steel / may be stainless per assembly
- Use: Frames, guards, covers, supports, agitator/drum cover
- Fit Note: Check your model’s parts list (Ultra Max II, Mark V/X, GMAX II, GH, Magnum—where specified)
Quantity
Genuine OEM Part
Fast Shipping (Order by 1 PM CST)
Easy Returns
Overview & Key Details
Compatible Machines
This Graco 104123 Lock Spring Washer is a common 1/4″ locking washer used across many Graco assemblies. Always confirm with your model’s parts manual.
- Ultra Max II series (e.g., 695, 795, 1095, 1595)
- Mark series (e.g., Mark V HD, Mark X HD)
- GMAX II & LineLazer frames/supports where 1/4″ fasteners are specified
- GH gasoline sprayers (selected support/guard/cover sub-assemblies)
- Magnum contractor units (X5, X7, ProX17, ProX19, ProX21) – where listed in the parts diagram
- Agitator, drum cover, elevator/pump support and similar sub-assemblies using 1/4-20 screws
What is it?
The Graco 104123 – Washer, Lock Spring is a 1/4″ split lock washer used under a screw head or nut to maintain clamping force and help prevent loosening from vibration in Graco equipment.
Key Specifications
| Part Number | 104123 |
|---|---|
| Part Name | Washer, Lock Spring |
| Nominal Size | 1/4″ (for 1/4-20 fasteners) |
| Typical Material | Spring steel / may be specified as stainless steel in some assemblies |
| Function | Helps prevent fastener loosening due to vibration; maintains preload |
| Common Use | Frames, guards, covers, supports, agitator/drum cover assemblies and general service locations using 1/4″ screws |
Cross-Reference & Notes
- Also described as: Lock Washer, Split Lock Washer, 1/4″ Lock Spring Washer
- Replace only with equal spec (size/material) to maintain clamping performance
- Pair with the correct 1/4-20 screw/nut per the parts manual
Frequently Asked Questions
Check your unit’s parts manual or the exploded diagram for the sub-assembly. If it calls out 104123 or a 1/4″ lock washer at that location, this part is the correct replacement.
Many assemblies specify spring steel, while others specify stainless. The correct material is determined by the specific sub-assembly and environment. Match what your manual lists to maintain performance and corrosion resistance.
Under the head of a screw or under a nut in locations subject to vibration—for example, frames, supports, guards, covers, and agitator/drum cover assemblies using 1/4″ hardware.
Place the washer between the fastener and the mating surface (split gap not critical to orientation). Tighten to the torque recommended for your 1/4-20 fastener and application. Replace deformed or corroded washers.
No reviews yet. Be the first to review this product!
