Graco 17B948 GL-33 Series Manifold Clip

GL-33 Series Manifold Clip – Graco Part 17B948

Compatible Systems

• Graco GL-series single-line injectors
• Equipment whose Graco parts list calls for part number 17B948

The Graco 17B948 GL-33 Series Manifold Clip is a manifold sold under Graco part number 17B948. A manifold distributes or collects fluid or air; inlet and outlet versions are not interchangeable. Graco GL-series injectors are metering devices for single-line parallel automatic lubrication systems; the GL-43 is the oil version and the GL-11 a high-volume grease injector.

About the GL-series single-line injectors

Each injector delivers an adjustable amount per cycle; a front-mounted pin shows it is cycling. Graco lists uses such as: automatic lubrication of on-road vehicles and off-road equipment. GL-32 and GL-33 injectors have a one-piece design, a longer-lasting seal and precision-honed parts, per Graco. Lube points can be added or removed without redesigning the system, per Graco. GL-32 and GL-33 are rated 1200 to 3500 psi and handle grease up to NLGI #2.

What the Terms in the Part Name Mean

• GL-33: Grease, 1200-3500 psi, output adjustable 0.001-0.003 in3, up to NLGI #2, 6 mm outlet; manifolds up to 10 injectors are listed.

Before You Order

• Match the part number exactly: Graco numbers that look alike can be different parts.
• Have your equipment model, and the serial number if available, ready if you contact us for help.

Service Notes

• Follow the pressure relief and lock-out steps in your Graco manual before servicing any pump, valve, applicator or electrical part.

Frequently Asked Questions