Graco 2006928 GL-1 X Replacement Injector with Cap

GL-1 X Replacement Injector with Cap – Graco Part 2006928

Compatible Systems

• Graco automatic lubrication equipment
• Equipment whose Graco parts list calls for part number 2006928

The Graco 2006928 GL-1 X Replacement Injector with Cap is a hardware part sold under Graco part number 2006928. This is a mechanical hardware part used to fasten, retain or close off another component. Graco automatic lubrication equipment supplies grease or oil to metering devices, such as injectors or divider valves, that deliver a measured amount to each lube point.

About the Graco automatic lubrication equipment

Single-line parallel: a pump sends lubricant down one line to injectors, each injector meters a set amount per cycle and shows it cycled with a pin; line pressure is vented between cycles. Series progressive: a pump feeds a divider valve whose pistons move in sequence, so each outlet gets a measured amount; if flow stops the pistons stop and resume from the same point. Graco lists uses such as: hydraulic fracturing equipment lubrication kits (G5 pumps, GL-1 injector manifolds); in-plant machinery lubrication (LubePro, Lube Master, Manzel). Graco GL-series injectors are metering devices for single-line parallel automatic lubrication systems. Standard GL-1 grease injectors are adjustable and have a top-mounted cycle pin that shows the injector is working. GL-1 X injectors are listed by Graco at 6000 psi maximum working pressure, and the GL-1 XL has a maximum output of 0.305 cubic inches.

What the Terms in the Part Name Mean

• GL-1 X: Higher-pressure GL-1 version, listed 6000 psi max working pressure; sold stand-alone/replacement and as 4-, 5-, 6-point versions.
• Injector: Metering device delivering a set grease amount to one point.

Before You Order

• Match the part number exactly: Graco numbers that look alike can be different parts.
• Have your equipment model, and the serial number if available, ready if you contact us for help.

Service Notes

• Follow the pressure relief and lock-out steps in your Graco manual before servicing any pump, valve, applicator or electrical part.

Frequently Asked Questions