Graco 24A922 GL-32 Grease Injector CS 2-Injector Manifold 1/4 NPT

GL-32 Grease Injector CS 2-Injector Manifold 1/4 NPT – Graco Part 24A922

Compatible Systems

• Graco GL-series single-line injectors
• Equipment whose Graco parts list calls for part number 24A922
• Systems that match the details in the part description

Graco part number 24A922 is the Graco 24A922 GL-32 Grease Injector CS 2-Injector Manifold 1/4 NPT, an injector. An injector is a metering device in a lubrication system that delivers a measured amount of lubricant to a lube point on each cycle. Graco GL-series injectors are metering devices for single-line parallel automatic lubrication systems; the GL-43 is the oil version and the GL-11 a high-volume grease injector.

About the GL-series single-line injectors

Each injector delivers an adjustable amount per cycle; a front-mounted pin shows it is cycling. Graco lists uses such as: automatic lubrication of on-road vehicles and off-road equipment. GL-32 and GL-33 injectors have a one-piece design, a longer-lasting seal and precision-honed parts, per Graco. Lube points can be added or removed without redesigning the system, per Graco. GL-32 and GL-33 are rated 1200 to 3500 psi and handle grease up to NLGI #2.

Details from the Part Description

• Material: carbon steel

What the Terms in the Part Name Mean

• GL-32: Grease, 1200-3500 psi (83-241 bar), output adjustable 0.001-0.008 in3, up to NLGI #2.
• CS: Carbon steel.
• 1/4 NPT: Inlet thread on NPT versions.
• Injector: Metering device delivering a set grease amount to one point.
• NPT: US tapered pipe thread.

Before You Order

• Check the output size or number of outlets in the description against the lubrication point it serves.
• Have your equipment model, and the serial number if available, ready if you contact us for help.

Service Notes

• Follow the pressure relief and lock-out steps in your Graco manual before servicing any pump, valve, applicator or electrical part.

Frequently Asked Questions