Graco 24V790 GS35 Standard Over-Temperature Switch Reverse Kit

GS35 Standard Over-Temperature Switch Reverse Kit – Graco Part 24V790

Compatible Systems

• Graco InvisiPac GS35 hot melt applicators
• Equipment whose Graco parts list calls for part number 24V790

Graco part number 24V790 is the Graco 24V790 GS35 Standard Over-Temperature Switch Reverse Kit, a switch kit. A kit bundles several parts under one part number; contents differ from kit to kit, so check the Graco parts list for this number. This one is listed with switch in its name: a switch opens or closes a circuit or signal. The GS35 is a Graco InvisiPac plug-free hot melt applicator offered with 1, 2 or 4 dispensing modules and with or without a solenoid.

About the InvisiPac GS35 hot melt applicators

Graco describes a free-flow manifold and an integrated module filter intended to protect the ball and seat from debris and char. Graco lists uses such as: Bonding and sealing. Applicators are offered with 24 VDC or 110 VAC solenoids or without a solenoid.

Before You Order

• Check the connector type and pin count against the mating part, and the sensor or signal type against the control.
• Disconnect power before changing any electrical part.
• Have your equipment model, and the serial number if available, ready if you contact us for help.

Service Notes

• Match the RTD type (Pt 100 or Ni 120) to the system setting.
• Follow the pressure relief and lock-out steps in your Graco manual before servicing any pump, valve, applicator or electrical part.

Frequently Asked Questions