Graco 24X641 PC-8e InvisiPac HM25/HM50 Pattern Controller
$5,313.00
Available to Order
Genuine Graco part 24X641, listed for InvisiPac hot melt packaging systems.
- Graco part number 24X641
- Listed for InvisiPac hot melt packaging systems
- Genuine OEM Graco part
Quantity
Genuine OEM Part
Fast Shipping (Order by 1 PM CST)
Easy Returns
PC-8e InvisiPac HM25/HM50 Pattern Controller – Graco Part 24X641
Compatible Systems
- Graco InvisiPac hot melt packaging systems
- Equipment whose Graco parts list calls for part number 24X641
Graco part number 24X641 is the Graco 24X641 PC-8e InvisiPac HM25/HM50 Pattern Controller, a control module. A control module is an electronic part that handles control, display or communication functions in the system. InvisiPac is Graco's tank-free hot melt packaging system, made up of a melter, heated hose and applicators.
About the InvisiPac hot melt packaging systems
Graco lists uses such as: Case and carton sealing.
What the Terms in the Part Name Mean
- Controller: Electronic unit that runs a system.
- InvisiPac: Graco hot melt adhesive delivery line; HM25c is described as a melt-on-demand system rated at 25 lb/hr.
- HM25: InvisiPac HM25c model (25 lb/hr melt rate per Graco).
Before You Order
- Check the connector type and pin count against the mating part, and the sensor or signal type against the control.
- Disconnect power before changing any electrical part.
- Have your equipment model, and the serial number if available, ready if you contact us for help.
Service Notes
- Follow the pressure relief and lock-out steps in your Graco manual before servicing any pump, valve, applicator or electrical part.
Frequently Asked Questions
Graco 24X641 PC-8e InvisiPac HM25/HM50 Pattern Controller is a control module. InvisiPac is Graco's tank-free hot melt packaging system, made up of a melter, heated hose and applicators.
Look up the part number in your Graco parts list or equipment manual and compare it with 24X641. If your list shows a different number, or you are not sure which part you need, send us the equipment model and what you are replacing and we will help match it.
Electronic unit that runs a system.
InvisiPac is Graco's tank-free hot melt packaging system, made up of a melter, heated hose and applicators. It is used for case and carton sealing.
The equipment model and serial number, the part number from your manual or parts diagram, a photo of the part you are replacing and a short description of the job. With those we can confirm whether the 24X641 is the right number.
Yes. It is sold under Graco part number 24X641 as a genuine OEM Graco part.
No reviews yet. Be the first to review this product!