Graco 258697 G3 Max Circuit Board Assembly

G3 Max Circuit Board Assembly – Graco Part 258697

Compatible Systems

• Graco G3 automatic lubrication pumps
• Equipment whose Graco parts list calls for part number 258697

Graco 258697 G3 Max Circuit Board Assembly (Graco part number 258697) is a control module. A control module is an electronic part that handles control, display or communication functions in the system. G3 is Graco's electric automatic lubrication pump line for grease and oil, in Standard, Pro, Max and High Flow versions.

About the G3 automatic lubrication pumps

Up to three pump elements per pump; reservoirs are stirring paddle with wiper arm, follower plate, or top-fill for oil; Pro and Max have a built-in controller, Standard has none. Graco lists uses such as: agriculture, construction, energy, fleets, industrial, mining, vehicle service (Graco's listed industries). G3 Max pumps dispense NLGI #000 to #2 greases and oil of at least 40 cSt. G3 Pro and Max pumps include a pre-lube option that starts a lube event at power-up. G3 Max Gen 2 should not lubricate more than 30 minutes at a time and follows a 33% duty cycle.

What the Terms in the Part Name Mean

• Board: Circuit board.

Before You Order

• Check the connector type and pin count against the mating part, and the sensor or signal type against the control.
• Disconnect power before changing any electrical part.
• Have your equipment model, and the serial number if available, ready if you contact us for help.

Service Notes

• Follow the pressure relief and lock-out steps in your Graco manual before servicing any pump, valve, applicator or electrical part.

Frequently Asked Questions