Graco 25E349 GL-1 Oil Conversion Kit

GL-1 Oil Conversion Kit – Graco Part 25E349

Compatible Systems

• Graco automatic lubrication equipment
• Equipment whose Graco parts list calls for part number 25E349

The Graco 25E349 GL-1 Oil Conversion Kit is a conversion kit sold under Graco part number 25E349. A conversion or upgrade kit changes the configuration of a unit; fit is specific to the model it is listed for. Graco automatic lubrication equipment supplies grease or oil to metering devices, such as injectors or divider valves, that deliver a measured amount to each lube point.

About the Graco automatic lubrication equipment

Single-line parallel: a pump sends lubricant down one line to injectors, each injector meters a set amount per cycle and shows it cycled with a pin; line pressure is vented between cycles. Series progressive: a pump feeds a divider valve whose pistons move in sequence, so each outlet gets a measured amount; if flow stops the pistons stop and resume from the same point. Graco lists uses such as: hydraulic fracturing equipment lubrication kits (G5 pumps, GL-1 injector manifolds); in-plant machinery lubrication (LubePro, Lube Master, Manzel). Graco GL-series injectors are metering devices for single-line parallel automatic lubrication systems. Standard GL-1 grease injectors are adjustable and have a top-mounted cycle pin that shows the injector is working. GL-1 X injectors are listed by Graco at 6000 psi maximum working pressure, and the GL-1 XL has a maximum output of 0.305 cubic inches.

What the Terms in the Part Name Mean

• Conversion kit: A kit that adapts one configuration to another, e.g.

Before You Order

• A kit is sold under one part number: check the Graco parts list for exactly what it contains.
• Have your equipment model, and the serial number if available, ready if you contact us for help.

Service Notes

• Follow the pressure relief and lock-out steps in your Graco manual before servicing any pump, valve, applicator or electrical part.

Frequently Asked Questions