Graco 96G410 G3 High Flow Pump 4L Transducer

G3 High Flow Pump 4L Transducer – Graco Part 96G410

Compatible Systems

• Graco G3 automatic lubrication pumps
• Equipment whose Graco parts list calls for part number 96G410
• Systems that match the details in the part description

Graco 96G410 G3 High Flow Pump 4L Transducer (Graco part number 96G410) is a transducer. A transducer is a sensing device that converts a physical quantity, such as pressure, into an electrical signal. G3 is Graco's electric automatic lubrication pump line for grease and oil, in Standard, Pro, Max and High Flow versions.

About the G3 automatic lubrication pumps

Up to three pump elements per pump; reservoirs are stirring paddle with wiper arm, follower plate, or top-fill for oil; Pro and Max have a built-in controller, Standard has none. Graco lists uses such as: agriculture, construction, energy, fleets, industrial, mining, vehicle service (Graco's listed industries). G3 Max pumps dispense NLGI #000 to #2 greases and oil of at least 40 cSt. G3 Pro and Max pumps include a pre-lube option that starts a lube event at power-up. G3 Max Gen 2 should not lubricate more than 30 minutes at a time and follows a 33% duty cycle.

Details from the Part Description

• Supply size: 4 L

What the Terms in the Part Name Mean

• Transducer: Converts pressure or another quantity to an electrical signal.

Before You Order

• Check the connector type and pin count against the mating part, and the sensor or signal type against the control.
• Disconnect power before changing any electrical part.
• Have your equipment model, and the serial number if available, ready if you contact us for help.

Service Notes

• Follow the pressure relief and lock-out steps in your Graco manual before servicing any pump, valve, applicator or electrical part.

Frequently Asked Questions